Original scientific paper
https://doi.org/10.13044/j.sdewes.d8.0363
Pre-treatment of Acetic Acid from Food Processing Wastewater Using Response Surface Methodology via Fenton Oxidation Process for Sustainable Water Reuse
Kowit Suwannahong
; Department of Environmental Health, Faculty of Public Health, Burapha University, Chonburi, Thailand
Surachai Wongcharee
; Field of Environmental Engineering, Faculty of Engineering, Mahasarakham University, Khamriang, Kantarawichai, Mahasarakham, Thailand
Jitporn Kreanuarte
; Independent innovation expertise: BuaTong village, Karnjanapisake Rd. BangBuaTong, Nontaburi, Thailand
Torpong Kreetachat
; Department of Environmental Engineering, School of Energy and Environment, University of Phayao, Phayao, Thailand
Abstract
This study designed to optimize the operating parameters of the Fenton process in removing acetic acid from food processing using Response Surface Methodology module in the Design of Expert for sustainable water reuse. Optimum operating conditions needed for the highest removal efficiency of 95.2% and 84.7% for color and chemical oxygen demand respectively were found to be at hydrogen peroxide concentration of 0.004 mol/L, ferrous iron concentration of 0.02 mol/L, initial pH of 3.45, and reaction time of 149.08 min for color. While, chemical oxygen demand had a maximum of around 84.7% removal efficiency that could be obtained at a hydrogen peroxide concentration of 0.014 mol/L, ferrous iron concentration of 0.051 mol/L, initial pH of 2.04, and reaction time of 144.58 min. The results showed that the Fenton process via Response Surface Methodology, at a certain level, may be used as a useful technology for pre- and post-treatment of wastewater from food processing for water scarcity as reclaimed water.
Keywords
Acetic acid; Fenton process; Food processing; Respond surface method; Central composite design; Water reuse
Hrčak ID:
270165
URI
Publication date:
31.12.2021.
Visits: 1.198 *