Original scientific paper
https://doi.org/10.17794/rgn.2024.2.7
GEOLOGICAL INVESTIGATIONS AND PRODUCTION PLANNING BY IDENTIFICATION OF THE DISCONTINUITIES AND ROCK MASS BLOCKS IN DIMENSION STONE QUARRIES: A CASE STUDY
Mohammad Hossein Jalalian
; Department of Mining Engineering, Isfahan University of Technology, Isfahan 8415683111, Iran
Raheb Bagherpour
orcid.org/0000-0002-7235-9966
; Department of Mining Engineering, Isfahan University of Technology, Isfahan 8415683111, Iran
*
Mehrbod Khoshouei
; Department of Mining Engineering, Isfahan University of Technology, Isfahan 8415683111, Iran
* Corresponding author.
Abstract
The dimension stone industry faces a significant environmental challenge due to the large amount of waste produced during the production process. About 51.3% of the materials extracted from dimension stone quarries worldwide end up as quarry waste. The presence of discontinuities and fractures primarily causes this waste. However, by examining the characteristics of these discontinuities and fractures and identifying in-situ blocks of the rock mass, it is possible to reduce the amount of waste produced during dimension stone quarrying. This study focuses on an abandoned quarry bench of the Lashotor quarries complex in the Isfahan Province, Iran. Due to high waste production, the quarry bench was left unused. The study aimed to identify the in-situ blocks of the quarry bench by examining the characteristics of the rock mass’s discontinuities and fractures. The authors used a modified algorithm to identify and grade all the quarry bench blocks based on the target market. The study revealed that some blocks in the abandoned quarry bench could be supplied to the target market, and the bench has the potential for block extraction. The algorithm’s modification based on the shape factor of blocks is an important innovation that increases the accuracy of block determination compared to previous methods. Overall, this algorithm can be used as a decision-making tool in extracting or not extracting the quarry bench of dimension stone quarries and implementing an optimal cutting pattern to reduce waste production.
Keywords
dimension stone; discontinuities modelling; rock fractures; geological investigations; waste production
Hrčak ID:
316625
URI
Publication date:
28.4.2024.
Visits: 608 *