Skip to the main content

Engineering Review : International journal for publishing of original researches from the aspect of structural analysis, materials and new technologies in the field of mechanical engineering, shipbuilding, fundamental engineering sciences, computer sciences, electrical engin, Vol. 32 No. 2, 2012.

Original scientific paper

Tungaloy Ceramic Cutting Tools at Interrupted Machninig

Robert Čep orcid id orcid.org/0000-0001-9610-4215 ; Faculty of Mechanical Engineering, VŠB – Technical University of Ostrava
Adam Janásek ; Faculty of Mechanical Engineering, VŠB – Technical University of Ostrava
Marek Sadílek orcid id orcid.org/0000-0001-6680-6865 ; Faculty of Mechanical Engineering, VŠB – Technical University of Ostrava
Lenka Čepová ; Faculty of Mechanical Engineering, VŠB – Technical University of Ostrava

Full text: english pdf 646 Kb

page 112-118

downloads: 966

cite

Abstract

The paper deals with testing of ceramic cutting tools with an interrupted machining. Tests have been performed on fixture – interrupted cut simulator constructed at Department of Machining and Assembly, FME, VŠB-TU Ostrava within the scope of the Czech Science Foundation project. The criterion of tool wear is either destruction of cutting tool or 6000 shocks. Testing cutting tool material used in this research is ceramic cutting tool produced by Tungaloy Company. Tested machined materials are 13MoCrV6 and C45 steels. The cutting speeds (408 and 580 m/min) and cutting feeds (0.15; 0.2; 0.25 and 0.3 mm) are investigated with variable parameters whereas the cutting depth is a constant parameter. The pictures of index-able inserts and graphs of dependence at variable cutting speed and cutting feed are shown as a result of a conducted investigation.

Keywords

Machining; Interrupted Cut; Ceramic Cutting Tool; Tests; Index-able Cutting Insert

Hrčak ID:

84229

URI

https://hrcak.srce.hr/84229

Publication date:

18.6.2012.

Visits: 1.511 *