Skip to the main content

Engineering Review : International journal for publishing of original researches from the aspect of structural analysis, materials and new technologies in the field of mechanical engineering, shipbuilding, fundamental engineering sciences, computer sciences, electrical engin, Vol. 31 No. 1, 2011.

Original scientific paper

Contact stresses in gear teeth due to tip relief profile modification

Kristina Marković ; Faculty of Engineering, University of Rijeka, Rijeka, Croatia
Marina Franulović orcid id orcid.org/0000-0002-6148-9001 ; Faculty of Engineering, University of Rijeka, Rijeka, Croatia

Full text: english pdf 322 Kb

page 19-26

downloads: 7.791

cite

Abstract

In this paper the linear tip relief profile modification has been observed. This kind of modification has been considered to be potentially dangerous considering micro-pitting initiation as a consequence of contact pressure increase. The amount of tip relief profile modification depends on the elastic gear tooth deflection that needs to be compensated. The standard gear model without linear tip relief profile modification, as well as the modified one, has been discretized by finite elements and analyzed using the finite element method to compare Hertz contact stresses on tooth flank, as influenced by the mentioned profile modification.

Keywords

spur involute gears; profile modification; tip relief; FEM

Hrčak ID:

70383

URI

https://hrcak.srce.hr/70383

Publication date:

14.7.2011.

Visits: 8.638 *