Skip to the main content

Engineering Review : International journal for publishing of original researches from the aspect of structural analysis, materials and new technologies in the field of mechanical engineering, shipbuilding, fundamental engineering sciences, computer sciences, electrical engin, Vol. 32 No. 3, 2012.

Original scientific paper

The influence of sub-temperature quenching temperature on microstructure and properties of 60Si2Mn steel

Anming Li
Mengjuan Hu

Full text: english PDF 356 Kb

page 181-186

downloads: 1.395

cite

Abstract

Influence of sub-temperature quenching temperature on the tensile strength, hardness and toughness of 60Si2Mn steel was studied, and the ferrite content, austenite grain size and martensite morphology of the microstructure of this steel after sub-temperature quenching were analyzed. The results show that duplex microstructure of martensite and ferrite is obtained by sub-temperature quenching of 60Si2Mn steel. The ferrite content decreases with the quenching temperature increasing. The strength and hardness of 60Si2Mn steel increase, however, its toughness decreases in the range of 770~810℃. The maximum strength and hardness can be obtained by quenching at 800℃, but the strength and hardness decease above 800℃. The small amount of strip ferrite is distributed among martensite lamellar to improve the toughness of the steel. All martensite structure can be obtained by quenching at 810℃.

Keywords

60Si2Mn steel; sub-temperature quenching; tensile strength; hardness; microstructure

Hrčak ID:

91983

URI

https://hrcak.srce.hr/91983

Publication date:

5.11.2012.

Visits: 1.898 *