Skip to the main content

Engineering Review : International journal for publishing of original researches from the aspect of structural analysis, materials and new technologies in the field of mechanical engineering, shipbuilding, fundamental engineering sciences, computer sciences, electrical engin, Vol. 38 No. 2, 2018.

Original scientific paper

https://doi.org/10.30765/er.38.2.5

Research on the grinding performance of high pressure sintering SiCp/Al matrix composites

Zhiru Chen ; The school of materials science and engineering Henan Polytechnic University
Changyun Li
Lei Xu
Guofa Mi
Yukun Hu

Full text: english PDF 3.595 Kb

page 175-181

downloads: 458

cite

Abstract

The two-dimensional vertical grinding test equipment was used to grind SiCp/Al composites which were prepared by high pressure sintering method. The SEM observation of grinding morphology showed that grinding damage can be prevented by SiC particles reinforcement, 60% volume fraction of SiC particles of SiCp/Al composite can hinder grinding depth and grinding performance was improved with the sintering pressure and temperature increasing. In addition, some scratches and exfoliated pits of SiC particles were observed on the surface of 60% volume SiCp/Al composite as the increase of grinding grain, while the depth of these scratches was shallower, there was no large area exfoliated pits of SiC reinforcements.

Keywords

SiCp/Al composite; grinding performance; grinding morphology

Hrčak ID:

196254

URI

https://hrcak.srce.hr/196254

Publication date:

23.3.2018.

Visits: 1.215 *