Skip to the main content

Original scientific paper

https://doi.org/10.5599/jese.564

Laser induced selective electroless copper plating on polyurethane using EDTA-Cu as active material

Binggong Yan ; Fujian Key Laboratory of Special Energy Manufacturing, Xiamen Key Laboratory of Digital Vision Measurement, Huaqiao University, Xiamen 361021, China
Xiaodi Huang ; Fujian Key Laboratory of Special Energy Manufacturing, Xiamen Key Laboratory of Digital Vision Measurement, Huaqiao University, Xiamen 361021, China
Xuan Song ; Fujian Key Laboratory of Special Energy Manufacturing, Xiamen Key Laboratory of Digital Vision Measurement, Huaqiao University, Xiamen 361021, China
Lei Kang ; Fujian Key Laboratory of Special Energy Manufacturing, Xiamen Key Laboratory of Digital Vision Measurement, Huaqiao University, Xiamen 361021, China
Qihe Le ; Fujian Key Laboratory of Special Energy Manufacturing, Xiamen Key Laboratory of Digital Vision Measurement, Huaqiao University, Xiamen 361021, China
Jiang Kaiyong ; Fujian Key Laboratory of Special Energy Manufacturing, Xiamen Key Laboratory of Digital Vision Measurement, Huaqiao University, Xiamen 361021, China


Full text: english pdf 1.458 Kb

page 331-339

downloads: 586

cite


Abstract

Using EDTA-Cu as the active material and polyurethane as the matrix, flexible cathodes were fabricated by laser-induced electroless copper plating process (LPKF-LDS) and characterized by SEM, X-ray energy spectrum and Auger electron spectroscopy. Flexible cathodes prepared from EDTA-Cu and polyurethane showed good selectivity in copper plating process. Composition and particle morphology of EDTA-Cu, laser power, scanning speed, laser wavelength, laser spot size, pulse frequency etc. are the main factors that affect the fineness of electroless copper plating. By adjusting these parameters, the fineness of the copper plating was improved. X-ray energy spectrum and Auger electron spectroscopy results showed that after the laser scanning, both Cu0 and Cu+ appeared in the scanning area, revealing thus the mechanism of electroless copper plating for polyurethane-EDTA-Cu flexible cathodes.

Keywords

EDTA-Cu; polyurethane; LPKF-LDS; flexible cathode

Hrčak ID:

204437

URI

https://hrcak.srce.hr/204437

Publication date:

16.8.2018.

Visits: 1.414 *