Metallurgy, Vol. 59 No. 3, 2020.
Original scientific paper
A process optimization on high temperature electrolytic desulfurization in hot metal pretreatment using magnesit-based desulfurizer
H. L. Han
; School of Material and Metallurgy, University of Science and Technology, Liaoning, AnShan, China
L. W. Zhou
; School of Material and Metallurgy, University of Science and Technology, Liaoning, AnShan, China
K. Liu
; School of Material and Metallurgy, University of Science and Technology, Liaoning, AnShan, China
Z. H. Lu
; School of Metallurgy, Northeastern University Shenyang, China
N. Luo
; School of Material and Metallurgy, University of Science and Technology, Liaoning, AnShan, China
Abstract
A magnesite-based desulfurizer was used for removing sulfur from hot metal by means of high temperature electrolysis technique. Through carrying out orthogonal factorial experiments it was found that the effect of the electric current on desulfurization is more significant than that of temperature. Results of single-tailed test show that when the temperature is constant, the desulfurization rate first increases with the increase of the current to a maximum value, and then, after dropping to the lowest level, gradually increases again as the current further increases. Finally, an optimum experimental condition is obtained as temperature of 1 400 °C and current of 1 A, achieving a desulfurization rate of 47,6 wt./% /min, which corresponds to a desulfurization efficiency of 62,6 %.
Keywords
desulfurization; electrolysis; hot metal; pretreatment-temperature; current
Hrčak ID:
237021
URI
Publication date:
1.7.2020.
Visits: 1.213 *