Original scientific paper
https://doi.org/10.17794/rgn.2022.1.10
EXPERIMENTAL EVALUATION OF LOCALLY SYNTHESIZED BIODIESEL DRILLING FLUID
Ugochukwu I. Duru
orcid.org/0000-0001-7920-8047
; Department of Petroleum Engineering, Federal University of Technology, Owerri, Nigeria
George O. Nduwuba
; Department of Petroleum Engineering, Federal University of Technology, Owerri, Nigeria
Ifeanyichukwu M. Onyejekwe
; Department of Petroleum Engineering, Federal University of Technology, Owerri, Nigeria
Princewill M. Ikpeka
orcid.org/0000-0002-1174-1491
; Department of Petroleum Engineering, Federal University of Technology, Owerri, Nigeria; School of Computing Engineering and Digital Technologies, Teesside University, Middlesbrough, United Kingdom, TS1 3BX
Abstract
Diesel oil has been the preferred base fluid for the formulation of oil-based drilling mud. Diesel oil has negative effects on the environment and there is a growing need for more environmentally sustainable alternatives that can be technically compared to diesel base oil. In recent times, the use of vegetable oils as drilling fluid base oil has been of interest. In this study, 1378 kg/m3 of palm kernel oil-based mud (PKOBM) and palm kernel oil biodiesel based mud (BDBM) were experimentally formulated. BDBM was synthesized by the transesterification of vegetable (palm kernel) oil. The performance of PKOBM and BDBM was then evaluated against conventional diesel oil-based mud (DOBM). The evaluation performed was based on the rheological, filtration and wall building properties, emulsion and thermal stabilities, and acute toxicity of the formulated drilling fluid systems. The results obtained from the study reveal that the mud systems (PKOBM and BDBM) show a typical Herschel-Bulkley (modified power-law) drilling mud rheological pattern at temperatures of 49°C, 66°C and 80°C. BDBM showed comparable rheological properties with better hole cleaning capacity as indicated by a lower flow index. For the filtrate loss test, BDBM exhibited a slightly lower filtrate loss compared to DOBM, whereas PKOBM had a higher fluid loss of 4.4 ml. For the filter cake and thermal stability test, there were no significant changes between DOBM and BDBM, whereas PKOBM had the least desirable performance. BDBM exhibited the most stable emulsion of 1274 volts breaking voltage and PKOBM, the least with 739 volts compared to 1169 volts breaking voltage of DOBM. This study concludes that BDBM could be used as an environmentally sustainable substitute for diesel oil-based mud (DOBM).
Keywords
biodiesel; rheological properties; filtrate loss; emulsion stability; thermal stability; acute toxicity
Hrčak ID:
271868
URI
Publication date:
2.2.2022.
Visits: 1.378 *