Skip to the main content

Original scientific paper

https://doi.org/10.15255/KUI.2021.047

Effect of Synthesis Methods on the Catalytic Reforming of Kerosene

Elham Saidi ; Malek Ashtar University of Technology, Faculty of Chemistry and Chemical Engineering, Iran
Mahmoud Ziarati ; Malek Ashtar University of Technology, Faculty of Chemistry and Chemical Engineering, Iran
Hossein Dehghani ; Malek Ashtar University of Technology, Faculty of Chemistry and Chemical Engineering, Iran
Nahid Khandan ; Iranian Research Organization for Science & Technology (IROST), Department of Chemical Technologies, Iran


Full text: english pdf 722 Kb

page 177-184

downloads: 338

cite


Abstract

Ni/Y samples were prepared by various synthesis methods to investigate the catalyst performance in the reforming of kerosene. Properties of the samples were characterised using XRD, BET, NH3-TPD, and FTIR techniques. Analysis of the products revealed that more isoalkanes were obtained by the sol-gel method (37.3 %), but the deposition method produced higher aromatic content (32.7 %). Ultimately, the production of 75.81 % jet fuel with a standard range of aromatics (10.70 %) and higher naphthenes (19.3 %) over impregnated catalyst led us to conclude that lower Brønsted acid sites inhibited the occurrence of side reactions and produced more jet fuels.




This work is licensed under a Creative Commons Attribution 4.0 International License.

Keywords

reforming; kerosene; synthesis method; Ni/Y catalysts; zeolite

Hrčak ID:

274105

URI

https://hrcak.srce.hr/274105

Publication date:

16.3.2022.

Article data in other languages: croatian

Visits: 791 *