Original scientific paper

Weldability Investigation of TStE 420 After Weld Thermal Cycle Simulation

Marko DUNĐER orcid.org/0000-0002-9360-0042 ; Faculty of Philosophy, University of Rijeka, Rijeka, Croatia
Tomaž VUHERER ; Faculty of Mechanical Engineering University of Maribor, Maribor, Slovenia
Ivica KLADARIĆ ; Mechanical Engineering Faculty in Slavonski Brod, J. J. Strossmayer University of Osijek, Slavonski Brod, Croatia

Abstract

The paper presents a short description and overview of the weld thermal
cycle simulation methods. An experimental investigation on the weld cycle
simulated specimens is predicted by a plan of experiment using single cycle
simulation. The obtained hardness results are compared with double cycle
simulated specimens results of individual points in the heat-affected zone.
Beside that, the characteristic microstructures of points in the heat-affected
zone after a single weld thermal cycle simulation are given. A thermal
simulation method is suitable for different weldability examinations. In
this paper, the authors would like to investigate the maximal hardness of
individual points in the weld joint what is important when considering cold
cracking sensitivity.

Keywords

Hardness; HSLA steel; Weldability; Weld thermal cycle simulation

Hrčak ID:

56737

URI

https://hrcak.srce.hr/56737

Publication date:

30.4.2010.

Article data in other languages: croatian

Visits: 2.873 *