Skoči na glavni sadržaj

Prethodno priopćenje

https://doi.org/10.14256/JCE.2311.2017

Pushover analysis for estimating seismic demand of elliptic braced moment resisting frames

Habib Ghasemi Jouneghani
Abbas Haghollahi
Mina Mortazavi


Puni tekst: hrvatski pdf 5.370 Kb

str. 941-955

preuzimanja: 147

citiraj

Puni tekst: engleski pdf 5.334 Kb

str. 941-955

preuzimanja: 220

citiraj


Sažetak

In this paper, an innovative steel bracing system, known as the seismic response of elliptic braced moment resisting frame (ELBRF), is evaluated. ELBRF has a better structural behavior comparing to the other bracing systems and it has an architectural advantage allowing to place openings in walls with less interference. The demand for seismic performance of ELBRF is estimated through different loading patterns by adopting the conventional pushover methods. The pushover results are verified through nonlinear time history analysis (NTHAs) of 3, 5, 7, and 10-story ELBRF frames, which are on type II soil and are affected by 10 scaled earthquake records. These results are also with special moment resisting frames (SMRF) and X-Braced CBF and Inverted V-Braced CBF concentrically braced frames. Story drifts, displacements, and story shears are evaluated. A proportionally accurate estimation is observed through the pushover methods in comparison with NTHAs. Modal Pushover Analysis (MPA) can estimate the seismic demands by overcoming the shortcomings of FEMA load distributions when the higher mode effects are of concern. The seismic performance of the ELBRF system against earthquakes has improved, failure is transmitted to the upper stories, and the response modification factor is increased in ELBRF.

Ključne riječi

elliptic braced moment resisting frame, seismic demand, nonlinear static pushover analysis, seismic performance, nonlinear time history analysis, response modification factor

Hrčak ID:

287751

URI

https://hrcak.srce.hr/287751

Datum izdavanja:

18.12.2022.

Podaci na drugim jezicima: hrvatski

Posjeta: 943 *