Tehnički vjesnik, Vol. 33 No. 4, 2026.
Prethodno priopćenje
https://doi.org/10.17559/TV-20260114003295
Comparison of Computational Fluid Dynamics and Experimental Testing of a Centrifugal Pump
Doris Stavljenić
; University of Applied Science Zagreb, Vrbik 8, 10000 Zagreb
*
Mario Kolar
; University of Applied Science Karlovac, Trg Josipa Jurja Strossmayera 9, 47000 Karlovac
Pero Raos
; University of Slavonski Brod, Mechanical Engineering Faculty in Slavonski Brod, Trg Ivane Brlić Mažuranić 2, 35000 Slavonski Brod
Hrvoje Meštrić
; Ministry of Science, Education and Youth of the Republic of Croatia, Donje Svetice 38, 10000 Zagreb
* Dopisni autor.
Sažetak
The work involved research in the field of fluid dynamics. An actual centrifugal radial pump, NNm 65-315, was used as an example; its parameters were tested and compliance with the design values was determined. Deviations in the pump parameters are permitted within the tolerance limits specified by the ISO 9906 Grade 2 standard. The study focused on comparing the results of experimental tests with those of computer analysis. SolidWorks Flow Simulation 2017 was used for the computer analysis, while two pumps of the same type were used for experimental testing. The aim of the paper is to demonstrate the accuracy and reliability of the results obtained from computer analysis.
Ključne riječi
centrifugal pump; computational fluid dynamics (CFD); experimental testing
Hrčak ID:
348720
URI
Datum izdavanja:
30.6.2026.
Posjeta: 0 *