Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.31298/sl.150.9-10.3

Stem and Crown Biomass Production of Paulownia RBTC15 Clone

Branko Ursić ; University of Zagreb Faculty of Forestry and Wood Technology, Zagreb, Croatia
Željko Zečić ; Zagreb
Karla Švajda ; ENNA Next d.o.o., Vukovar, Croatia
Lucia Oršulić ; Croatian Forests Ltd., Forest Administration Office Požega, Croatia
Marko Juratović ; University of Zagreb Faculty of Forestry and Wood Technology, Zagreb, Croatia
Dinko Vusić ; University of Zagreb Faculty of Forestry and Wood Technology, Zagreb, Croatia *

* Dopisni autor.


Puni tekst: engleski pdf 2.109 Kb

str. 423-432

preuzimanja: 0

citiraj


Sažetak

This paper examines the production potential of Croatian domestic Paulownia RBTC15 clone in Požega-Slavonia County over a single growing season. In total, seven fields were included in the research, together with 417 measured trees. At the level of all measured fields, an average DBH increment in researched season was 2.1 cm, and an average height increment was 1.8 m. Biomass and stem volume equations explained more than 95% of the variability. Stem and crown biomass increment together at the field level ranged from 1.04 t/ha to 12.29 t/ha, while stem volume increment ranged from 3.0 m3/ha to 24.32 m3/ha. For both measurements (before and after the growing season), the determined moisture content was higher in the stem than in the crown. The determined basic wood density of the stem wood was quite lower than that determined density for the crown wood. Overall results present a starting point for further research, but also provide valuable information about the production potential of an unresearched Paulownia clone developed for Croatian climate conditions.

Ključne riječi

aboveground biomass; stem volume; moisture content; wood density

Hrčak ID:

351706

URI

https://hrcak.srce.hr/351706

Datum izdavanja:

30.9.2026.

Posjeta: 0 *