Drvna industrija, Vol. 64 No. 3, 2013.
Izvorni znanstveni članak
https://doi.org/10.5552/drind.2013.1253
Mode I Critical Stress Intensity Factor of Beech Wood (Fagus Sylvatica) in a TL Configuration: A Comparison of Different Methods
Miran Merhar
orcid.org/0000-0003-0420-787X
; Odjel za znanost o drvu i tehnologiju, Biotehnički fakultet, Sveučilište u Ljubljani, Ljubljana, Slovenija
Dominika Gornik Bučar
; Odjel za znanost o drvu i tehnologiju, Biotehnički fakultet, Sveučilište u Ljubljani, Ljubljana, Slovenija
Bojan Bučar
; Odjel za znanost o drvu i tehnologiju, Biotehnički fakultet, Sveučilište u Ljubljani, Ljubljana, Slovenija
Sažetak
The paper presents a comparison between various methods of mode I critical stress intensity factor KIC calculations of beech wood in the TL configuration. The first method is the stress intensity factor extrapolation to the distance of 0 mm from the crack tip; the second method is the use of the J integral; and the third method is based on the differences in deformation energies from which the strain energy release rate per unit of crack propagation length was obtained. The fourth method is the calculation of material deformation around the crack or the displacement of the triangle element node; and the fifth method uses a generally known equation for the CT specimen for plane-strain conditions in isotropic material. Using the finite element method, it was found that the J integral was least sensitive to the size and shape of the elements. It was used to calculate the critical stress intensity factor KIC for beech wood in a TL configuration. The average value is 0.56 MPa√m with a standard deviation of 0.047 MPa√m.
Ključne riječi
fracture toughness; mode I critical stress intensity factor; fracture mechanics; beech wood
Hrčak ID:
108109
URI
Datum izdavanja:
26.9.2013.
Posjeta: 3.054 *