Drvna industrija, Vol. 68 No. 1, 2017.
Izvorni znanstveni članak
https://doi.org/10.5552/drind.2017.1630
Determination of Screw Withdrawal Resistance of Some Heat-Treated Wood Species
Osman Perçin
; Sveučilište Necmettin Erbakan, Fakultet likovnih umjetnosti, Odjel za uređenje interijera i dizajn okoliša, Konya, Turska
Şekip Şadiye Yasar
; Sveučilište Gumushane, Strukovna visoka škola, Odjel za dizajn, Gumushane, Turska
Mustafa Altunok
; Sveučilište Gazi, Tehnološki fakultet, Odjel za industrijski inženjering drvnih proizvoda, Ankara, Turska
Oğuzhan Uzun
; Sveučilište Cankırı Karatekin, Tehnički i poslovni koledž, Çankırı, Turska
Sažetak
In this study, the screw withdrawal resistance of heat-treated hornbeam (Carpinus betulus L.), black pine (Pinus nigra Arnold) and Uludağ fir (Abies bornmuellerinana Mattf.) was determined according to the ASTM D 1761 standard. For this purpose, wood materials were heat treated at 150, 170, 190 and 210 °C for 3 h. After the heat treatment, the screw withdrawal resistance of the wood was determined in radial, tangential and transverse directions. As a result, the screw withdrawal resistance values decreased with increasing heat treatment temperature and the lowest resistance was obtained in the wood heat-treated at 210 °C. In terms of wood species, the highest screw withdrawal resistance was found in hornbeam (Carpinus betulus L.), while the lowest value was observed in black pine (Pinus nigra Arnold). Additionally, in terms of the cross-sectional direction, the highest screw withdrawal resistance was determined in the tangential direction, while the lowest resistance value was observed in the transverse direction.
Ključne riječi
heat treatment; black pine; hornbeam; Uludağ fir; screw withdrawal resistance
Hrčak ID:
178668
URI
Datum izdavanja:
30.3.2017.
Posjeta: 2.472 *