Stručni rad

https://doi.org/10.21278/TOF.41109

Numerical Analysis of Partial Abrasion of the Straddle-type Monorail Vehicle running Tyre

Zixue Du ; Institute of Urban Rail, ChongQing JiaoTong University, ChongQing,China
Xiaoxia Wen ; School of Electrical and Vehicle Engineering, Chong Qing JiaoTongUniversity, Chongqing, China
Dayi Zhao ; Institute of Urban Rail, ChongQing JiaoTong University, ChongQing,China
Zhouzhou Xu ; School of Electrical and Vehicle Engineering, Chong Qing JiaoTongUniversity, Chongqing, China
Liang Chen ; School of Electrical and Vehicle Engineering, Chong Qing JiaoTongUniversity, Chongqing, China

Sažetak

The finite element model of the running tyre and the pre-stressed concrete (PC) track beam are created in the study. The wheel-rail contact status under the conditions such as acceleration or braking, lateral deviation, and roll is analysed. The wear law of the running tyre under the operating condition of driving on winding roads is discussed. The results show that the running tyre will unevenly wear when driving on the winding road; the smaller curve radius and the faster speed result in heavier and more uneven wear. There is a larger slip between the running tyre on the inner side of the curve and the rail surface, and this tyre has more uneven wear than the running tyre on the outer side of the curve. The research findings provide a theoretical basis for solving the problem of reducing the uneven wear of the running tyre.

Ključne riječi

Straddle-type monorail vehicle; Finite element method; Running tyre; Partial abrasion

Hrčak ID:

179263

URI

https://hrcak.srce.hr/179263

Datum izdavanja:

26.4.2017.

Posjeta: 2.205 *