Izvorni znanstveni članak
https://doi.org/10.17559/TV-20161018122324
Regenerating the NC code in order to improve the surface quality
Dragan Lazarević
orcid.org/0000-0001-5106-554X
; Faculty of Technical Sciences, University of Priština, Kneza Miloša 7, 38220 Kosovska Mitrovica, Serbia
Bogdan Nedić
; Faculty of Engineering, University of Kragujevac, Sestre Janjić 6, 34000 Kragujevac, Serbia
Vlatko Marušić
orcid.org/0000-0003-0719-3127
; Mechanical Engineering Faculty in Slavonski Brod, University of Josip Juraj Strossmayer in Osijek, Trg Ivane Brlić-Mažuranić 2, 35000 Slavonski Brod, Croatia
Milan Mišić
; Higher Technical School of Professional Studies Zvecan, Nušićeva 6, 38227 Zvecan, Serbia
Živče Šarkoćević
orcid.org/0000-0002-6805-9936
; Higher Technical School of Professional Studies Zvecan, Nušićeva 6, 38227 Zvecan, Serbia
Sažetak
The paper presents the research results of the impact of variable machining parameters: feed and spindle speed on surface roughness of Aluminium alloy 6005-T6, at CNC in the up and down milling with tools of different dimensions and different materials (Ø6 HSS, Ø6 VHM and Ø10 VHM). The properties and classification of Aluminium alloys are cited. The definition of surface roughness at end milling is given and parameters that affect it are specified. It was concluded that the feed is the parameter that has the most influence on surface roughens, while the lowest roughness is achieved by up milling. Correlation equations have provided good prediction of surface roughness in the case of machining of VHM by cutter Ø10. The results of the experiment will serve as an input into the model for control of input parameters of the machining process by regeneration of NC code for the purpose of quality improvement of machined surface.
Ključne riječi
aluminium alloy; cutting parameters; regenerating NC code; surface roughness; up/down milling
Hrčak ID:
186076
URI
Datum izdavanja:
2.9.2017.
Posjeta: 2.200 *