Izvorni znanstveni članak

https://doi.org/10.5552/drvind.2019.1825

Stress and Strain Analysis of Plywood Seat Shell

Seid Hajdarević orcid.org/0000-0002-3636-010X ; Sveučilište u Sarajevu, Strojarski fakultet, Sarajevo, Bosna i Hercegovina
Murčo Obućina ; Sveučilište u Sarajevu, Strojarski fakultet, Sarajevo, Bosna i Hercegovina
Elmedin Mešić orcid.org/0000-0002-3695-416X ; Sveučilište u Sarajevu, Strojarski fakultet, Sarajevo, Bosna i Hercegovina
Sandra Martinović ; Sveučilište u Sarajevu, Strojarski fakultet, Sarajevo, Bosna i Hercegovina

Sažetak

In this paper, the stress and strain analysis of common laminated wood seat shell is performed. Experimental stiffness evaluation is conducted by measuring displacement of the point on the backrest, and experimental stress analysis is carried out by tensometric measuring at the critical transition area from the seat to the backrest. Finite element analysis is carried out layer by layer with a “2D linear elastic model” for orthotropic materials. Good matching is found between numerical and experimental results of displacement. It is also shown that the results of the principal stress in the measurement points of the seat shell compare favourably with experimental data. The applied in-plane stress analysis of each individual veneer is not applicable for interlaminar stress calculations that are a significant factor in curved forms of laminated wood. Curved forms of laminated wood products require more complex numerical analysis, but the method can be used to achieve approximate data in early phase of product design.

Ključne riječi

laminated wood; seat shell; tensometric measuring; strain gauges; stress; strain; FEM

Hrčak ID:

218211

URI

https://hrcak.srce.hr/218211

Datum izdavanja:

26.3.2019.

Podaci na drugim jezicima: hrvatski

Posjeta: 2.125 *