Skoči na glavni sadržaj

Metalurgija , Vol. 54 No. 1, 2015.

  • Datum izdavanja: 01.01.2015.
  • Objavljen na Hrčku: 14.09.2014.

Sadržaj

Puni tekst

12th International Symposium of Croatian Metallurgical Society, June 19-23, 2016 - FIRST CIRCULAR – CALL FOR PAPERS (str. 5-7)

Ilija Mamuzić
Ostalo

engleski pdf 113kb
Election assambly of Croatian Metallurgical Society (str. 8-8)


Ostalo

engleski pdf 138kb
Minutes of the Meeting of the Editorial Board of the Journal Metalurgija, June 23, 2014 (str. 9-10)

Ilija Mamuzić
Ostalo

engleski pdf 167kb
The effects of the metal temperature and wall thickness on flake graphite layer in ductile iron (str. 11-14)

M. Górny, R. Dańko, M. Holtzer
Izvorni znanstveni članak

engleski pdf 326kb
The influence of the shape of wax pattern on the kinetics of drying of ceramic moulds (str. 15-18)

J. Zych, J. Kolczyk, Ł. Jamrozowicz
Izvorni znanstveni članak

engleski pdf 270kb
Fatigue behaviour of synthetic nodular cast irons (str. 19-22)

A. Vaško, L. Trško, R. Konečná
Izvorni znanstveni članak

engleski pdf 391kb
The drying kinetics of protective coatings used on sand molds (str. 23-26)

Ł. Jamrozowicz, J. Zych, J. Kolczyk
Izvorni znanstveni članak

engleski pdf 351kb
A Flow rate of gas versus the level of gas dispersion in physical model of continuous refining reactor (str. 27-30)

M. Saternus, T. Merder
Izvorni znanstveni članak

engleski pdf 408kb
Removal of Ni (II) and Cr (VI) ions from aqueous solution using by-product from the production of aluminium (str. 31-34)

A. Štrkalj, Z. Glavaš, G. Matijašić
Izvorni znanstveni članak

engleski pdf 215kb
Influence of refining treatments on the properties of Al-Si alloys (str. 35-38)

S. Rzadkosz, J. Zych, M. Piękoś, J. Kozana, A. Garbacz-Klempka, J. Kolczyk, Ł. Jamrozowicz
Izvorni znanstveni članak

engleski pdf 238kb
Possibilities of Fe-RICH phases elimination with using heat treatment in secondary Al-Si-Cu cast alloy (str. 39-42)

L. Hurtalová, E. Tillová, M. Chalupová
Izvorni znanstveni članak

engleski pdf 368kb
The study and microstructure analysis of zinc and zinc oxide (str. 43-46)

N. Luptáková, F. Pešlová, J. Kliber
Izvorni znanstveni članak

engleski pdf 489kb
Grain size influences the corrosion and cavitation of Ni3Al intermetallic alloys (str. 47-50)

D. Zasada, R. Jasionowski, J. Sienkiewicz
Izvorni znanstveni članak

engleski pdf 535kb
Synthesis and characterization of hardened Cu-Fe-Ni-P alloy (str. 51-54)

G. Brovč, G. Dražič, B. Karpe, I. Djordjević, G. Lojen, B. Kosec, M. Bizjak
Izvorni znanstveni članak

engleski pdf 454kb
Effect of variable load on crack initiation microalloyed steel S 690-QL (str. 55-58)

M. Burzić, M. Manjgo, J. Bernetič, Z. Burzić, M. Arsić
Izvorni znanstveni članak

engleski pdf 174kb
High frequency fatigue test of IN 718 alloy – microstructure and fractography evaluation (str. 59-62)

J. Belan
Izvorni znanstveni članak

engleski pdf 501kb
Electrochemical characterisation of X10CrNi 18-8 steel in artificial plasma (str. 63-66)

J. Przondziono, W. Walke
Izvorni znanstveni članak

engleski pdf 116kb
Vacuum brazing of tools with a thin foil (str. 67-70)

J. Tušek, A. Skumavc, D. Klobčar
Izvorni znanstveni članak

engleski pdf 245kb
Influence of shielding gas on fume and gas emission during ARC weld brazing of steel sheets with coatings (str. 71-74)

J. Matusiak, J. Wyciślik
Izvorni znanstveni članak

engleski pdf 260kb
Numerical simulation in roll pass design for bar rolling (str. 75-78)

S. A. Aksenov, E. N. Chumachenko, I. V. Logashina, T. Kubina
Izvorni znanstveni članak

engleski pdf 277kb
Physical modelling of the plastic working processes of modified Zr-Nb zirconium alloy bars and tubes (str. 79-82)

A. Kawałek, H. Dyja, A. M. Galkin, K. V. Ozhmegov, M. Knapiński
Izvorni znanstveni članak

engleski pdf 313kb
The effect of condition of the charge surface on the scale adhesion for excess air combustion (str. 83-86)

J. Boryca, T. Wyleciał, D. Urbaniak
Izvorni znanstveni članak

engleski pdf 194kb
Investigation of the physical parameters of duplex stainless steel (DSS) surface integrity after turning (str. 87-90)

G. Krolczyk, P. Nieslony, S. Legutko, I. Samardzic
Izvorni znanstveni članak

engleski pdf 290kb
Investigation of selected surface integrity features of duplex stainless steel (DSS) after turning (str. 91-94)

G. Krolczyk, P. Nieslony, S. Legutko, S. Hloch, I. Samardzic
Izvorni znanstveni članak

engleski pdf 250kb
Strength of briquettes made of Cu concentrate and carbon-bearing materials (str. 95-97)

B. Oleksiak, M. Kozioł, J. Wieczorek, M. Krupa, P. Folęga
Prethodno priopćenje

engleski pdf 186kb
Chemometric study of the sinter mixtures used in sinter plants in Poland (str. 98-100)

A. Smoliński, D. Burchart-Korol, J. Korol
Prethodno priopćenje

engleski pdf 161kb
Comparison of local stress values obtained by two measuring methods on blast furnace shell (str. 101-104)

P. Bigoš, J. Kuľka, M. Mantič, M. Kopas
Prethodno priopćenje

engleski pdf 306kb
The use of mathematical model of hardness spread in the research on the property of cast-iron molds (str. 105-108)

P. Kuryło, P. Frankovský, E. Tertel, J. Janek
Prethodno priopćenje

engleski pdf 238kb
Thermal reclamation of the used moulding sands (str. 109-112)

M. Łucarz
Prethodno priopćenje

engleski pdf 804kb
Behaviour of iron during reduction of slag obtained from copper flash smelting (str. 113-115)

G. Siwiec, M. Sozańska, L. Blacha, A. Smalcerz
Prethodno priopćenje

engleski pdf 197kb
Effects of a reducer type on copper flash smelting slag decopperisation (str. 116-118)

B. Oleksiak, J. Lipart, A. Karbownik, R. Burdzik
Prethodno priopćenje

engleski pdf 223kb
Residual stresses in castings produced by press die casting technology (str. 119-122)

D. Novoselović, I. Budić, I. Samardžić
Prethodno priopćenje

engleski pdf 350kb
Flow and mixing of liquid steel in multi-strand tundish delta type – physical modelling (str. 123-126)

T. Merder, J. Pieprzyca, M. Warzecha, P. Warzecha
Prethodno priopćenje

engleski pdf 458kb
The influence of steel preheating level in the tundish on the primary structure of a continuously cast ingot (str. 127-130)

J. Pieprzyca, T. Merder, M. Warzecha, J. Skorupa
Prethodno priopćenje

engleski pdf 328kb
Microstructure of AlSi17Cu5 alloy after overheating over liquidus temperature (str. 131-134)

J. Piątkowski, R. Wieszała
Prethodno priopćenje

engleski pdf 515kb
Wide – ranging influence of mischmetal on properties of G17CrMo5-5 cast steel (str. 135-138)

J. Kasińska
Prethodno priopćenje

engleski pdf 850kb
Modeling of MnS precipitation during the crystallization of grain oriented silicon steel (str. 139-142)

D. Kalisz, P. L. Żak, J. Lelito, M. Szucki, J. S. Suchy, B. Gracz
Prethodno priopćenje

engleski pdf 249kb
Copper matrix composites reinforced with volcanic tuff (str. 143-146)

J. Mikuła, M. Łach, J. S. Kowalski
Prethodno priopćenje

engleski pdf 414kb
The efficiency of ion nitriding of austenitic stainless steel 304 using the “active screen” (str. 147-150)

M. Ogórek, S. Skuza, T. Frączek
Prethodno priopćenje

engleski pdf 177kb
Modifications of the chemical composition and microstructure of flash smelting copper slags in the process of their reduction (str. 151-153)

T. Rzychoń, T. Matuła, B. Chmiela, J. Łabaj, K. Rogóż
Prethodno priopćenje

engleski pdf 274kb
Application of feal intermetallic phase matrix based alloys in the turbine components of a turbocharger (str. 154-156)

J. Cebulski
Prethodno priopćenje

engleski pdf 385kb
Development of technology of complex aluminum-silicon-chrome alloy with utilization of off grade raw materials (str. 157-160)

A. Mekhtiev, Ye. Shabanov, A. Issagulov, S. Baissanov, A. Baissanov, D. Issagulova
Prethodno priopćenje

engleski pdf 156kb
The influence of drawing speed on structure changes in high carbon steel wires (str. 161-164)

M. Suliga, R. Kruzel, T. Garstka, J. Gazdowicz
Prethodno priopćenje

engleski pdf 421kb
The influence of chemical composition on structure of plate X100 after physical simulations of finishing rolling process with accelerated cooling (str. 165-168)

M. Knapinski, A. Kawalek, B. Koczurkiewicz, T. Garstka
Prethodno priopćenje

engleski pdf 493kb
Application of shape memory alloy (SMA) as actuator (str. 169-172)

L'. Miková, S. Medvecká - Beňová, M. Kelemen, F. Trebuňa, I. Virgala
Prethodno priopćenje

engleski pdf 372kb
Experimental verification of the shape memory alloy (SMA) spring actuator for application on in-pipe machine (str. 173-176)

M. Kelemen, I. Virgala, E. Prada, T. Lipták
Prethodno priopćenje

engleski pdf 229kb
Numerical analysis of the cross wedge rolling process (CWR) for a stepped shaft (str. 177-180)

Z. Pater, A. Tofil, J. Tomczak, T. Bulzak
Prethodno priopćenje

engleski pdf 224kb
Mechanical and corrosion properties of aluminium alloy EN AW 6082 after severe plastic deformation (SPD) (str. 181-183)

P. Lacková, M. Buršák, T. Kvačkaj, M. Halama
Prethodno priopćenje

engleski pdf 236kb
The influnece of the partial single reduction on mechanical properties wires made from trip steel with 0,43 % C (str. 184-186)

S. Wiewiórowska, Z. Muskalski
Prethodno priopćenje

engleski pdf 282kb
Contribution to the thermal properties of selected steels (str. 187-190)

P. Jonšta, I. Vlčková, L'. Krišták, I. Špička, Z. Jonšta
Prethodno priopćenje

engleski pdf 156kb
The influence of heat treatnemnt on the abrasive wear resistnace of a construction and a tool steel (str. 191-193)

M. Orečný, M. Buršák, J. Viňáš
Prethodno priopćenje

engleski pdf 410kb
Material properties of rubber-cord flexible element of pneumatic flexible coupling (str. 194-196)

S. Medvecká - Beňová, L'. Miková, P. Kaššay
Prethodno priopćenje

engleski pdf 177kb
Verification of the material properties of the structure elements of compressor station for the needs of their redesign (str. 197-200)

P. Sivák, I. Delyová, F. Trebuňa
Prethodno priopćenje

engleski pdf 562kb
Using of fluidized-bed jet mill to a super fine comminution of steel composite (str. 201-203)

D. Urbaniak, C. Kolmasiak, T. Wyleciał
Prethodno priopćenje

engleski pdf 148kb
Determination of substrate log-normal distribution in the AZ91/SICP composite (str. 204-206)

J. Lelito, P. L. Żak, B. Gracz, M. Szucki, D. Kalisz, P. Malinowski, J. S. Suchy, W. K. Krajewski
Prethodno priopćenje

engleski pdf 238kb
Modified low-cycle fatigue (LCF) test (str. 207-210)

M. Maj, A. Klasik, K. Pietrzak, D. Rudnik
Prethodno priopćenje

engleski pdf 240kb
DP 600 steel research of dynamic testing (str. 211-213)

M. Mihaliková, M. Német, V. Girman
Prethodno priopćenje

engleski pdf 348kb
The impact of the steel cord construction on its decline of breaking force after fatigue test in bidirectional bending conditions (str. 214-216)

R. Kruzel, M. Suliga
Prethodno priopćenje

engleski pdf 262kb
Metallographic and corrosion research of copper from archaeological sites (str. 217-220)

A. Garbacz-Klempka, S. Rzadkosz, R. Klempka, W. Ossowski
Prethodno priopćenje

engleski pdf 417kb
Experimental identification of piezo actuator characteristic (str. 221-223)

L'. Miková, M. Kelemen, F. Trebuňa, I. Virgala, S. Medvecká-Beňová
Prethodno priopćenje

engleski pdf 269kb
Influence of material and gear parameters on the safety of gearing in metallurgical industry (str. 224-226)

S. Medvecká - Beňová, I. Virgala, M. Kelemen, L'. Miková
Prethodno priopćenje

engleski pdf 252kb
The methodology and model for in-process inventories calculation in the conditions of metallurgy production (str. 227-230)

D. Malindžák, J. Šaderová, D. Vitko, M. Malindžáková, A. Gazda
Prethodno priopćenje

engleski pdf 196kb
Impact of strengthening fluids on roughness of 3D printed models (str. 231-234)

T. Galeta, G. Šimunović, M. Mazurek
Prethodno priopćenje

engleski pdf 397kb
Shaping the edges using flowdrill technology (str. 235-238)

W. Matysiak, L. Bernat
Prethodno priopćenje

engleski pdf 253kb
Factors of estimating flatness error as a surface requirement of exploitation (str. 239-242)

M. Hadžistević, B. Štrbac, V. Spasić Jokić, M. Delić, M. Sekulić, J. Hodolič
Prethodno priopćenje

engleski pdf 267kb
Factors of human resource planning in metallurgical company (str. 243-246)

A. Samolejová, P. Wicher, M. Lampa, R. Lenort, J. Kutáč, A. Sikorová
Prethodno priopćenje

engleski pdf 191kb
Modelling of outbursts and ejections occurrences during steel production (str. 247-250)

M. Malindžáková, A. Rosová, V. Baranová, J. Futó
Prethodno priopćenje

engleski pdf 392kb
Stock return, seasonality and asymmetric conditional volatility in steel & iron subsector (str. 251-253)

V. Chirila, C. Chirila
Prethodno priopćenje

engleski pdf 128kb
Acknowledgement to Reviewers 53 (2014) 1-4 (str. 254-0)

Ilija Mamuzić
Zahvala

engleski pdf 67kb
Biohydrometallurgical methods for metals recovery from waste materials (str. 255-258)

J. Willner, J. Kadukova, A. Fornalczyk, M. Saternus
Pregledni rad

engleski pdf 193kb
Refining processes in the copper casting technology (str. 259-262)

S. Rzadkosz, M. Kranc, A. Garbacz-Klempka, J. Kozana, M. Piękoś
Pregledni rad

engleski pdf 129kb
The recommendation system knowledge representation and reasoning procedures under uncertainty for metal casting (str. 263-266)

S. Kluska-Nawarecka, E. Nawarecki, B. Śnieżyński, D. Wilk-Kołodziejczyk
Pregledni rad

engleski pdf 264kb
Analysis of ecological intensity of metallurgical production (str. 267-269)

K. Janovská, R. Lenort, A. Samolejová, Š. Vilamová, D. Stoch
Pregledni rad

engleski pdf 111kb
Thermo-ecological cost (TEC) evaluation of metallurgical processes (str. 270-272)

W. Stanek, L. Blacha, M. Szega
Pregledni rad

engleski pdf 191kb
Risk, profitability and value of the leading steel producers on the world capital markets (str. 273-275)

I. Jonek-Kowalska
Pregledni rad

engleski pdf 131kb
Water scarcity assessment of steel production in national integrated steelmaking route (str. 276-278)

D. Burchart-Korol, M. Kruczek
Pregledni rad

engleski pdf 101kb
The identification of zones of amplification of disruptions in network supply chains of metallurgic products (str. 279-282)

M. Kramarz, W. Kramarz
Pregledni rad

engleski pdf 120kb
Innovation in metallurgical waste management (str. 283-285)

T. Lis, K. Nowacki, M. Żelichowska, H. Kania
Pregledni rad

engleski pdf 132kb
The relation productivity - environment in the context of sustainable development – case study on the Romanian industry (str. 286-288)

V. A. Popescu, Gh. N. Popescu, C. R. Popescu
Pregledni rad

engleski pdf 106kb
The impact of global crisis on the dominant sectors of the economy at the Romanian industry (str. 289-291)

V. A. Popescu, Gh. N. Popescu, C. R. Popescu
Pregledni rad

engleski pdf 71kb
Copper alloys in investment casting technology (str. 293-296)

S. Rzadkosz, J. Zych, A. Garbacz-Klempka, M. Kranc, J. Kozana, M. Piękoś, J. Kolczyk, Ł. Jamrozowicz, T. Stolarczyk
Stručni rad

engleski pdf 260kb
Aspects regarding the use of the industrial wastes as raw materials for the manufacture of building materials (str. 297-300)

R. G. Popa, L. G. Popescu, T. A. Abagiu, C. Popescu, R. Cazalbasu
Stručni rad

engleski pdf 138kb
Research perspectives in the field of acoustic treatment of liquid alloys of iron (str. 301-303)

K. Nowacki
Stručni rad

engleski pdf 186kb
Return on shares of steel companies under the influence of mergers and acquisitions (str. 304-306)

J. Zuzik, R. Weiss, E. Weiss, L. Mixtaj, A. Kiraly
Stručni rad

engleski pdf 185kb
Survey of 11th International Symposium of Croatian Metallurgical Society, SHMD '2014 (str. 307-308)

Ilija Mamuzić
Ostalo

engleski pdf 157kb

Posjeta: 167.613 *