Skip to the main content

Metallurgy , Vol. 53 No. 4, 2014.

  • Publication date: 01.10.2014.
  • Published on HRČAK: 01.06.2014.

Table of contents

Full text

An experimental study on the air delivery and gas removal method in a model of furnace for ferroalloy production (page 447-450)

S. Gil, J. Góral, J. Ochman, M. Saternus, W. Bialik
Original scientific paper


Emission of polycyclic aromatic hydrocarbons (PAHs) and benzene, toluene, ethylbenzene and xylene (BTEX) from the furan moulding sands with addition of the reclaim (page 451-454)

M. Holtzer, A. Bobrowski, R. Dańko, A. Kmita, S. Żymankowska-Kumon, M. Kubecki, M. Górny
Original scientific paper


Improve the humidity resistance of sodium silicate sands by ester-microwave composite hardening (page 455-458)

W. Huafang, G. Wenbang, L. Jijun
Original scientific paper


Cohesion and adhesion properties of modified water glass with colloidal solutions of ZnO (page 459-462)

K. Smyksy, A. Kmita, B. Hutera, D. Drożyński, B. Stypuła, M. Hajos, M. Starowicz
Original scientific paper


Synthesis and character of cerium oxide (CeO2) nanoparticles by the precipitation method (page 463-465)

Y. H. Liu, J. C. Zuo, X. F. Ren, L. Yong
Original scientific paper


Identification of low cycle fatigue parameters of high strength low-alloy (HSLA) steel at room temperature (page 466-468)

S. Bulatović, Lj. Milović, A. Sedmak, I. Samardžić
Original scientific paper


Microstructure of NiTi orthodontic wires observations using transmission electron microscopy (page 469-472)

J. Ferčec, D. Jenko, B. Buchmeister, F. Rojko, B. Budič, B. Kosec, R. Rudolf
Original scientific paper


Change of ears creation of AHSS steels after heat treatment of zinc coating (page 473-476)

E. Spišák, J. Majerníková, J. Slota
Original scientific paper


Impact of choice of stabilized hysteresis loop on the end result of investigation of high-strength low-alloy (HSLA) steel on low cycle fatigue (page 477-480)

S. Bulatović, Z. Burzić, V. Aleksić, A. Sedmak, Lj. Milović
Original scientific paper


Fatigue crack growth and fracture mechanics analysis of a working roll surface layer material (page 481-484)

M. Drobne, T. Vuherer, I. Samardžić, S. Glodež
Original scientific paper


Physical modelling of plastic deformation conditions for the rolling proces of AZ31 bars in a three high skew rolling mill (page 489-492)

A. Gryc, T. Bajor, H. Dyja, S. Sawicki, K. Laber
Original scientific paper


Forming a lever preform made of aluminium alloy 2014 (page 505-508)

T. Bulzak, J. Tomczak, Z. Pater
Original scientific paper


Micro friction stir welding of copper electrical contacts (page 509-512)

D. Klobčar, J. Tušek, M. Bizjak, V. Lešer
Original scientific paper


Structural, chemical and deformation changes in friction welded joint of dissimilar steels (page 513-516)

N. Ratković, R. Nikolić, I. Samardžić
Original scientific paper


Problems in laser repair welding of polished surfaces (page 517-520)

A. Skumavc, J. Tušek, M. Mulc, D. Klobčar
Original scientific paper


Investigation of sequential cryogenic hard turning and ball burnishing processes (page 521-525)

K. Żak, W. Grzesik, M. Prażmowski
Original scientific paper


Analysis of residual stresses on the transverse beam of a casting stand by means of drilling method (page 526-528)

P. Frankovský, F. Šimčák
Original scientific paper


Microhardness changes gradient of the duplex stainless steel (DSS) surface layer after dry turning (page 529-532)

G. Krolczyk, P. Nieslony, S. Legutko, A. Stoic
Original scientific paper


Monitoring of focusing tube wear during abrasive waterjet (AWJ) cutting of AISI 309 (page 533-536)

P. Hreha, A. Radvanská, J. Cárach, D. Lehocká, K. Monková, G. Krolczyk, A. Ruggiero, I. Samardzić, D. Kozak, S. Hloch
Original scientific paper


Abrasive waterjet (AWJ) titanium tangential turning evaluation (page 537-540)

S. Hloch, J. Hlaváček, K. Vasilko, J. Cárach, I. Samardžić, D. Kozak, I. Hlavatý, J. J. Ščučka, J. Klich, D. Klichová
Original scientific paper


Application of photostress method in stress analysis of a rotating disc (page 541-544)

P. Frankovský, F. Trebuňa
Original scientific paper


Risk based on quality, environmental and occupational safety in heat treatment processes (page 545-548)

T. Karkoszka, M. Soković
Original scientific paper


Alkaline carbonates in blast furnace process (page 549-552)

P. Besta, A. Samolejová, R. Lenort, K. Janovská, J. Kutáč, A. Sikorová
Preliminary communication


Studying and improving blast furnace cast iron quality (page 556-558)

T. K. Balgabekov, D. K. Issin, B. M. Kimanov, A. Z. Issagulov, Zh. D. Zholdubayeva, A. Z. Akashev, B. D. Issin
Preliminary communication


Harmful admixtures assessment in sinter mixtures used in iron ore sinter plants in Poland (page 559-562)

J. Korol, D. Burchart-Korol, A. Smoliński
Preliminary communication


Silicon production using long flaming coal and improvement of its quality indicators (page 563-566)

A. D. Mekhtiev, M. J. Tolymbekov, A. V. Kim, Zh. D. Zholdubaeva, D. K. Issin, A. Z. Issagulov, B. D. Issin
Preliminary communication


Calculation of the boundary conditions in the continuous casting of steel process (page 571-573)

K. Miłkowska-Piszczek, J. Falkus
Preliminary communication


Effects of a bath composition on aluminium loss during Ti-Al alloy smelting in a vacuum induction furnace (page 574-576)

L. Blacha, K. Michalek, A. Smalcerz, M. Warzecha
Preliminary communication


Pyrometallurgical slags as a potential source of selected metals recovery (page 577-580)

K. Nowińska, Z. Adamczyk, E. Melaniuk-Wolny
Preliminary communication


Studying properties of carbonaceous reducers and process of forming primary titanium slags (page 581-584)

T. K. Balgabekov, S. O. Baissanov, D. K. Issin, Zh. D. Zholdubayeva, A. Z. Akashev, A. S. Baissanov, B. D. Issin
Preliminary communication


Reduction of copper slag with the use of carbon granulates (page 585-587)

G. Siwiec, B. Oleksiak, T. Matuła, L. Socha, W. Stanek
Preliminary communication


Melting and casting of ingots made of an Mg - Li type alloys (page 588-590)

T. Mikuszewski
Preliminary communication


Compressive stresses of mould mixture (page 591-593)

G. Solenicki, I. Budic, I. Kladaric, D. Novoselovic
Preliminary communication


Influence of process parameters on castability at full mold casting (page 594-596)

I. Budic, D. Novoselovic, I. Samardzic
Preliminary communication


Long - range foundry Al composite alloys (page 597-600)

A. D. Mekhtiev, A. G. Kosnikov, D. K. Issin, Zh. D. Zholdubaeva, B. D. Issin
Preliminary communication


Developing technological process of obtaining giality casts (page 601-604)

A. Issagulov, V. Kulikov, D. Issagulova, E. Shcherbakova, A. Kuszhanova
Preliminary communication


The obtained of concentrates containing precious metals for pyrometallurgical processing (page 605-608)

B. Oleksiak, G. Siwiec, A. Blacha-Grzechnik, J. Wieczorek
Preliminary communication


Possibilities of platinum recovery from metal supported spent auto catalysts (page 609-612)

A. Fornalczyk, J. Cebulski, M. Saternus, J. Willner
Preliminary communication


Characteristics of low nickel ferritic-austenitic corrosion resistant cast steel (page 613-616)

B. Kalandyk, R. Zapała, S. Sobula, M. Górny, L. Boroń
Preliminary communication


Analysis of material reliability of AlSi17Cu5 alloy using statistical weibull distribution (page 617-620)

J. Piątkowski, M. Jabłońska
Preliminary communication


Cr - Ni system alloys composition impact on durability value (page 621-623)

A. Z. Issagulov, S. S. Kvon, V. Yu. Kulikov, A. A. Sakbossynova
Preliminary communication


Cold weld cracking susceptibility of high strength low alloyed (HSLA) steel NIONIKRAL 70 (page 624-626)

A. S. Tawengi, A. Sedmak, V. Grabulov
Preliminary communication


Weldability prediction of high strength steel S960QL after weld thermal cycle simulation (page 627-630)

M. Dunđer, T. Vuherer, I. Samardžić
Preliminary communication


Refurbishment of damaged tools using the combination of GTAW and laser beam welding (page 631-633)

J. Tušek, A. Skumavc, K. Pompe, D. Klobčar
Preliminary communication


The stress–strain state of the cracked welded joint between the header and the shell of PGV-1000M steam generator (page 634-636)

S. M. Ban’ko, S. V. Kobel’skii, I. Samardžić
Preliminary communication


Impact energy analysis of quenched and tempered fine grain structural steel specimens after weld thermal cycle simulation (page 637-640)

M. Dunđer, T. Vuherer, I. Samardžić
Preliminary communication


FEM analysis of hollow hub forming in rolling extrusion process (page 641-644)

J. Bartnicki
Preliminary communication


Rotary compression process for producing toothed hollow shafts (page 649-652)

J. Tomczak
Preliminary communication


Analysis of the helical-wedge rolling process for producing a workholding bolt (page 653-656)

Z. Pater
Preliminary communication


Research on deformations which appear in within the metal structures of mining equipment (page 657-660)

G. Paraschiv, D. Dobrotă
Preliminary communication


Assessment of properties thermal sprayed coatings realised using cermet blend powder (page 661-664)

J. Brezinová, A. Guzanová, E. Spišák
Preliminary communication


A model for the pavement temperature prediction at specified depth using neural networks (page 665-667)

B. Matić, D. Matić, S. Sremac, N. Radović, P. Viđikant
Preliminary communication


Diagnosis of the wear of gears in the gearbox using the wavelet packet transform (page 673-676)

T. Figlus, M. Stańczyk
Preliminary communication


Reducing harmful effects of metals in water (page 677-680)

I. Tepić, G. Tepić, P. Viđikant, T. Pejakov, R. Kulundžić
Preliminary communication


Material flow enhancement in production assembly lines under application of zoned order picking systems (page 681-684)

D. Živanić, G. Vujić, B. Kosec, A. Stoić
Preliminary communication


Production of technical silicon and silicon carbide from rice-husk (page 685-688)

A. Z. Issagulov, V. A. Kim, S. S. Kvon, V. Yu. Kulikov, A. U. Tussupova
Preliminary communication


Transformers as a potential for soil contamination (page 689-692)

N. Stojić, M. Pucarević, D. Mrkajić, I. Kecojević
Preliminary communication


Development of polymer packaging for power cable (page 693-696)

S. Sremac, P. Gladović, M. Đelošević, B. Matić, A. Matić
Preliminary communication


The state of art and foresight of world’s casting production (page 697-700)

M. Holtzer, R. Dańko, S. Żymankowska-Kumon
Review article


Ergonomic and work safety evaluation criteria of process excellence in the foundry industry (page 701-704)

M. Butlewski, A. Misztal, M. Jasiulewicz-Kaczmarek, S. Janik
Review article


Some viewpoints of materials forming technology (page 705-708)

J. Kliber
Review article


The use of value stream mapping to introduction of organizational innovation in industry (page 709-712)

R. Wolniak, B. Skotnicka-Zasadzien
Review article


Export, import, production and use of wire in the Czech Republic (page 713-716)

P. Plunder, I. Vozňáková, A. Samolejová, K. Janovská
Review article


Guidelines for the rail grade selection (page 717-720)

M. Tomičić-Torlaković
Review article


Managing rail service life (page 721-724)

Z. Popović, L. Lazarević, Lj. Brajović, P. Gladović
Review article


Formation and planning of virtual production networks (VPN) in metallurgical clusters (page 725-727)

S. Saniuk, A. Saniuk, R. Lenort, A. Samolejova
Review article


The application of winning key metrics in a metallurgical firm (page 728-730)

M. Mikušová, P. Horváthová, K. Janovská, A. Samolejová
Review article


Visits: 150.204 *