hrcak mascot   Srce   HID

Izvorni znanstveni članak

Direct Torque Control of Induction Motor with Stator Flux Correction

Dubravko Krušelj
Mario Bilić
Boris Furčić
Vladimir Siladi
Miroslav Vučetić

Puni tekst: engleski, pdf (2 MB) str. 41-46 preuzimanja: 760* citiraj
APA 6th Edition
Krušelj, D., Bilić, M., Furčić, B., Siladi, V. i Vučetić, M. (2003). Direct Torque Control of Induction Motor with Stator Flux Correction. Automatika, 44 (1-2), 41-46. Preuzeto s https://hrcak.srce.hr/6756
MLA 8th Edition
Krušelj, Dubravko, et al. "Direct Torque Control of Induction Motor with Stator Flux Correction." Automatika, vol. 44, br. 1-2, 2003, str. 41-46. https://hrcak.srce.hr/6756. Citirano 03.12.2021.
Chicago 17th Edition
Krušelj, Dubravko, Mario Bilić, Boris Furčić, Vladimir Siladi i Miroslav Vučetić. "Direct Torque Control of Induction Motor with Stator Flux Correction." Automatika 44, br. 1-2 (2003): 41-46. https://hrcak.srce.hr/6756
Harvard
Krušelj, D., et al. (2003). 'Direct Torque Control of Induction Motor with Stator Flux Correction', Automatika, 44(1-2), str. 41-46. Preuzeto s: https://hrcak.srce.hr/6756 (Datum pristupa: 03.12.2021.)
Vancouver
Krušelj D, Bilić M, Furčić B, Siladi V, Vučetić M. Direct Torque Control of Induction Motor with Stator Flux Correction. Automatika [Internet]. 2003 [pristupljeno 03.12.2021.];44(1-2):41-46. Dostupno na: https://hrcak.srce.hr/6756
IEEE
D. Krušelj, M. Bilić, B. Furčić, V. Siladi i M. Vučetić, "Direct Torque Control of Induction Motor with Stator Flux Correction", Automatika, vol.44, br. 1-2, str. 41-46, 2003. [Online]. Dostupno na: https://hrcak.srce.hr/6756. [Citirano: 03.12.2021.]

Sažetak
Direct torque control (DTC) method with correction of stator flux vector is presented in the paper. The correction is made by means of appropriate component of stator current vector. Thus, controlled quantities (electromagnetic torque and stator flux) are estimated only from stator parameters and measured stator quantities, and there is no need to use rotor parameters, which are dependent on the operating condition, and rotor quantities, which cannot be measured. With the proposed method stable operation in whole speed range, robust start-up with slow change of the torque and fast torque response are achieved. Simulations and experimental tests verify the validity of the method.

Ključne riječi
induction motors; estimation techniques; vector control

Hrčak ID: 6756

URI
https://hrcak.srce.hr/6756

[hrvatski]

Posjeta: 1.614 *