Izvorni znanstveni članak
Weldability of microalloyed quenched and tempered steels as used in shipbuilding
Nedjeljko Mišina
Marijo Oršulić
Ivan Polajnar
Sažetak
This paper deals with the results of research conducted on quenched and tempered microalloyed steel. The welding process applied the MAG procedure with various heat inputs. In order to relieve the residual stresses, the annealing was done at 450, 550 and 650°C. The influence of heat input and stress relieving heat treatment has been researched by testing mechanical properties.
Ključne riječi
Hrčak ID:
8566
URI
Datum izdavanja:
26.12.2003.
Posjeta: 5.849 *