Izvorni znanstveni članak
The angle between the occlusal plane and the horizontal plane of the articulators with the quick mounting face bow
Asja Čelebić
; Zavod za mobilnu protetiku, Stom atološki fakultet, Zagreb, Hrvatska
Krešimir Kraljević
; Zavod za mobilnu protetiku, Stom atološki fakultet, Zagreb, Hrvatska
Melita Valentić- Peruzović
; Zavod za mobilnu protetiku, Stom atološki fakultet, Zagreb, Hrvatska
Živana Živković
; Zavod za fiksnu protetiku, Stom atološki fakultet, Zagreb, Hrvatska
Jasmina Stipetić
; Zavod za fiksnu protetiku, Stom atološki fakultet, Zagreb, Hrvatska
Sažetak
Correct determination of the occlusal plane is important for estetic,
phonetic and masticatory function of the denture. As many different
criterias are used in clinical practice to determine the occlusal plane on the wax rims, the aim of this study was to find the angle between the occlusal plane and the horizontal plane in the articulators with the quick mounting face bow. The measurements were made on the casts of 30 eugnath individuals with at least 28 natural teeth, mounted in S.A.M. artikulator through the transfer with the Quick mounting face bow, in the position of maximum intercuspation. Measurements were made with a precise calliper and were transfered to the callibrated paper. The angles were measured between the occlusal plane and the horizontal plane. The angle is 9,42 °+ 4,1° in the population of this country. This result can be helpful to determine the occlusal plane or to control if the occlusal plane, determined by the other methods is in the correct position in articulator.
Ključne riječi
occlusal plane; natural dentition; articulators horizontal plane
Hrčak ID:
101307
URI
Datum izdavanja:
15.6.1989.
Posjeta: 2.261 *