hrcak mascot   Srce   HID

Prethodno priopćenje

Cutting tool wear monitoring with the use of impedance layers

Marek Sadílek   ORCID icon orcid.org/0000-0001-6680-6865 ; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15, 708 33 Ostrava, Czech Republic
Jiří Kratochvíl ; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15, 708 33 Ostrava, Czech Republic
Jana Petrů ; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15, 708 33 Ostrava, Czech Republic
Robert Čep ; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15, 708 33 Ostrava, Czech Republic
Tomáš Zlámal ; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15, 708 33 Ostrava, Czech Republic
Dana Stančeková ; University of Žilina, Faculty of Mechanical Engineering, Department of Machining and Manufacturing Engineering, Univerzitna 8215/1, 010 26 Žilina, Slovakia

Puni tekst: engleski, pdf (2 MB) str. 639-644 preuzimanja: 723* citiraj
APA 6th Edition
Sadílek, M., Kratochvíl, J., Petrů, J., Čep, R., Zlámal, T. i Stančeková, D. (2014). Cutting tool wear monitoring with the use of impedance layers. Tehnički vjesnik, 21 (3), 639-644. Preuzeto s https://hrcak.srce.hr/123349
MLA 8th Edition
Sadílek, Marek, et al. "Cutting tool wear monitoring with the use of impedance layers." Tehnički vjesnik, vol. 21, br. 3, 2014, str. 639-644. https://hrcak.srce.hr/123349. Citirano 18.02.2020.
Chicago 17th Edition
Sadílek, Marek, Jiří Kratochvíl, Jana Petrů, Robert Čep, Tomáš Zlámal i Dana Stančeková. "Cutting tool wear monitoring with the use of impedance layers." Tehnički vjesnik 21, br. 3 (2014): 639-644. https://hrcak.srce.hr/123349
Harvard
Sadílek, M., et al. (2014). 'Cutting tool wear monitoring with the use of impedance layers', Tehnički vjesnik, 21(3), str. 639-644. Preuzeto s: https://hrcak.srce.hr/123349 (Datum pristupa: 18.02.2020.)
Vancouver
Sadílek M, Kratochvíl J, Petrů J, Čep R, Zlámal T, Stančeková D. Cutting tool wear monitoring with the use of impedance layers. Tehnički vjesnik [Internet]. 2014 [pristupljeno 18.02.2020.];21(3):639-644. Dostupno na: https://hrcak.srce.hr/123349
IEEE
M. Sadílek, J. Kratochvíl, J. Petrů, R. Čep, T. Zlámal i D. Stančeková, "Cutting tool wear monitoring with the use of impedance layers", Tehnički vjesnik, vol.21, br. 3, str. 639-644, 2014. [Online]. Dostupno na: https://hrcak.srce.hr/123349. [Citirano: 18.02.2020.]
Puni tekst: hrvatski, pdf (2 MB) str. 639-644 preuzimanja: 220* citiraj
APA 6th Edition
Sadílek, M., Kratochvíl, J., Petrů, J., Čep, R., Zlámal, T. i Stančeková, D. (2014). Nadzor trošenja reznog alata upotrebom otpornih slojeva. Tehnički vjesnik, 21 (3), 639-644. Preuzeto s https://hrcak.srce.hr/123349
MLA 8th Edition
Sadílek, Marek, et al. "Nadzor trošenja reznog alata upotrebom otpornih slojeva." Tehnički vjesnik, vol. 21, br. 3, 2014, str. 639-644. https://hrcak.srce.hr/123349. Citirano 18.02.2020.
Chicago 17th Edition
Sadílek, Marek, Jiří Kratochvíl, Jana Petrů, Robert Čep, Tomáš Zlámal i Dana Stančeková. "Nadzor trošenja reznog alata upotrebom otpornih slojeva." Tehnički vjesnik 21, br. 3 (2014): 639-644. https://hrcak.srce.hr/123349
Harvard
Sadílek, M., et al. (2014). 'Nadzor trošenja reznog alata upotrebom otpornih slojeva', Tehnički vjesnik, 21(3), str. 639-644. Preuzeto s: https://hrcak.srce.hr/123349 (Datum pristupa: 18.02.2020.)
Vancouver
Sadílek M, Kratochvíl J, Petrů J, Čep R, Zlámal T, Stančeková D. Nadzor trošenja reznog alata upotrebom otpornih slojeva. Tehnički vjesnik [Internet]. 2014 [pristupljeno 18.02.2020.];21(3):639-644. Dostupno na: https://hrcak.srce.hr/123349
IEEE
M. Sadílek, J. Kratochvíl, J. Petrů, R. Čep, T. Zlámal i D. Stančeková, "Nadzor trošenja reznog alata upotrebom otpornih slojeva", Tehnički vjesnik, vol.21, br. 3, str. 639-644, 2014. [Online]. Dostupno na: https://hrcak.srce.hr/123349. [Citirano: 18.02.2020.]

Sažetak
The article deals with problems of cutting process monitoring in real time. It is focused on tool wear by means of impedance layers applied on ceramic cutting inserts. In the experimental part the cutting process is monitored using electrical resistance measurement. The results are compared and verified using the monitored cutting temperature and tool wear. The testing of impedance layers is reasonable mainly for cutting edge diagnostics. The width of this layer determines the wear allowance of tool wear (flank wear). Excessive wear causes a sharp reduction of this layer and thus a sharp increase in electrical resistance, which is a warning signal of the end of the cutting edge durability.

Ključne riječi
ceramic insert; impedance layer; tool wear; turning

Hrčak ID: 123349

URI
https://hrcak.srce.hr/123349

[hrvatski]

Posjeta: 1.146 *