hrcak mascot   Srce   HID

Preliminary communication

Cutting tool wear monitoring with the use of impedance layers

Marek Sadílek   ORCID icon orcid.org/0000-0001-6680-6865 ; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15, 708 33 Ostrava, Czech Republic
Jiří Kratochvíl ; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15, 708 33 Ostrava, Czech Republic
Jana Petrů ; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15, 708 33 Ostrava, Czech Republic
Robert Čep ; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15, 708 33 Ostrava, Czech Republic
Tomáš Zlámal ; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15, 708 33 Ostrava, Czech Republic
Dana Stančeková ; University of Žilina, Faculty of Mechanical Engineering, Department of Machining and Manufacturing Engineering, Univerzitna 8215/1, 010 26 Žilina, Slovakia

Fulltext: english, pdf (2 MB) pages 639-644 downloads: 724* cite
APA 6th Edition
Sadílek, M., Kratochvíl, J., Petrů, J., Čep, R., Zlámal, T. & Stančeková, D. (2014). Cutting tool wear monitoring with the use of impedance layers. Tehnički vjesnik, 21 (3), 639-644. Retrieved from https://hrcak.srce.hr/123349
MLA 8th Edition
Sadílek, Marek, et al. "Cutting tool wear monitoring with the use of impedance layers." Tehnički vjesnik, vol. 21, no. 3, 2014, pp. 639-644. https://hrcak.srce.hr/123349. Accessed 8 Apr. 2020.
Chicago 17th Edition
Sadílek, Marek, Jiří Kratochvíl, Jana Petrů, Robert Čep, Tomáš Zlámal and Dana Stančeková. "Cutting tool wear monitoring with the use of impedance layers." Tehnički vjesnik 21, no. 3 (2014): 639-644. https://hrcak.srce.hr/123349
Harvard
Sadílek, M., et al. (2014). 'Cutting tool wear monitoring with the use of impedance layers', Tehnički vjesnik, 21(3), pp. 639-644. Available at: https://hrcak.srce.hr/123349 (Accessed 08 April 2020)
Vancouver
Sadílek M, Kratochvíl J, Petrů J, Čep R, Zlámal T, Stančeková D. Cutting tool wear monitoring with the use of impedance layers. Tehnički vjesnik [Internet]. 2014 [cited 2020 April 08];21(3):639-644. Available from: https://hrcak.srce.hr/123349
IEEE
M. Sadílek, J. Kratochvíl, J. Petrů, R. Čep, T. Zlámal and D. Stančeková, "Cutting tool wear monitoring with the use of impedance layers", Tehnički vjesnik, vol.21, no. 3, pp. 639-644, 2014. [Online]. Available: https://hrcak.srce.hr/123349. [Accessed: 08 April 2020]
Fulltext: croatian, pdf (2 MB) pages 639-644 downloads: 222* cite
APA 6th Edition
Sadílek, M., Kratochvíl, J., Petrů, J., Čep, R., Zlámal, T. & Stančeková, D. (2014). Nadzor trošenja reznog alata upotrebom otpornih slojeva. Tehnički vjesnik, 21 (3), 639-644. Retrieved from https://hrcak.srce.hr/123349
MLA 8th Edition
Sadílek, Marek, et al. "Nadzor trošenja reznog alata upotrebom otpornih slojeva." Tehnički vjesnik, vol. 21, no. 3, 2014, pp. 639-644. https://hrcak.srce.hr/123349. Accessed 8 Apr. 2020.
Chicago 17th Edition
Sadílek, Marek, Jiří Kratochvíl, Jana Petrů, Robert Čep, Tomáš Zlámal and Dana Stančeková. "Nadzor trošenja reznog alata upotrebom otpornih slojeva." Tehnički vjesnik 21, no. 3 (2014): 639-644. https://hrcak.srce.hr/123349
Harvard
Sadílek, M., et al. (2014). 'Nadzor trošenja reznog alata upotrebom otpornih slojeva', Tehnički vjesnik, 21(3), pp. 639-644. Available at: https://hrcak.srce.hr/123349 (Accessed 08 April 2020)
Vancouver
Sadílek M, Kratochvíl J, Petrů J, Čep R, Zlámal T, Stančeková D. Nadzor trošenja reznog alata upotrebom otpornih slojeva. Tehnički vjesnik [Internet]. 2014 [cited 2020 April 08];21(3):639-644. Available from: https://hrcak.srce.hr/123349
IEEE
M. Sadílek, J. Kratochvíl, J. Petrů, R. Čep, T. Zlámal and D. Stančeková, "Nadzor trošenja reznog alata upotrebom otpornih slojeva", Tehnički vjesnik, vol.21, no. 3, pp. 639-644, 2014. [Online]. Available: https://hrcak.srce.hr/123349. [Accessed: 08 April 2020]

Abstracts
The article deals with problems of cutting process monitoring in real time. It is focused on tool wear by means of impedance layers applied on ceramic cutting inserts. In the experimental part the cutting process is monitored using electrical resistance measurement. The results are compared and verified using the monitored cutting temperature and tool wear. The testing of impedance layers is reasonable mainly for cutting edge diagnostics. The width of this layer determines the wear allowance of tool wear (flank wear). Excessive wear causes a sharp reduction of this layer and thus a sharp increase in electrical resistance, which is a warning signal of the end of the cutting edge durability.

Keywords
ceramic insert; impedance layer; tool wear; turning

Hrčak ID: 123349

URI
https://hrcak.srce.hr/123349

[croatian]

Visits: 1.151 *