hrcak mascot   Srce   HID

Metalurgija, Vol. 41 No. 4, 2002.

Izvorni znanstveni članak

Submerged Arc Surfacing with a Multiple-Wire Electrode

J. Tušek

Puni tekst: engleski, pdf (363 KB) str. 295-300 preuzimanja: 127* citiraj
APA 6th Edition
Tušek, J. (2002). Submerged Arc Surfacing with a Multiple-Wire Electrode. Metalurgija, 41 (4), 295-300. Preuzeto s https://hrcak.srce.hr/128567
MLA 8th Edition
Tušek, J.. "Submerged Arc Surfacing with a Multiple-Wire Electrode." Metalurgija, vol. 41, br. 4, 2002, str. 295-300. https://hrcak.srce.hr/128567. Citirano 25.03.2019.
Chicago 17th Edition
Tušek, J.. "Submerged Arc Surfacing with a Multiple-Wire Electrode." Metalurgija 41, br. 4 (2002): 295-300. https://hrcak.srce.hr/128567
Harvard
Tušek, J. (2002). 'Submerged Arc Surfacing with a Multiple-Wire Electrode', Metalurgija, 41(4), str. 295-300. Preuzeto s: https://hrcak.srce.hr/128567 (Datum pristupa: 25.03.2019.)
Vancouver
Tušek J. Submerged Arc Surfacing with a Multiple-Wire Electrode. Metalurgija [Internet]. 2002 [pristupljeno 25.03.2019.];41(4):295-300. Dostupno na: https://hrcak.srce.hr/128567
IEEE
J. Tušek, "Submerged Arc Surfacing with a Multiple-Wire Electrode", Metalurgija, vol.41, br. 4, str. 295-300, 2002. [Online]. Dostupno na: https://hrcak.srce.hr/128567. [Citirano: 25.03.2019.]

Sažetak
Submerged arc surfacing with a multiple-wire electrode is a new process variant which has been rarely used, in spite of its numerous advantages in comparison to other processes, in practical applications. The unit for surfacing with the multiple - electrode differs little from a classic unit for submerged arc welding with a single-wire electrode. The difference between them consists in that in our unit several wires travel through a joint contact tube simultaneously. All of the wires are fed with the same rate and have a joint regulation and power source. In welding with the multiple-wire electrode it is possible to weld with two, three, four or even more wires simultaneously. In the joint contact tube wires of different diameters and different chemical composition and solid or flux-cored wires may be used. Mechanical properties of surfacing welds depend on the type the parent metal and the filler material, welding parameters and the type of welding flux used.

Hrčak ID: 128567

URI
https://hrcak.srce.hr/128567

[hrvatski]

Posjeta: 209 *