hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.5772/59903

Influence of Milling Media on Mechanically Exfoliated MoS2

Marek Kostecki ; Faculty of Materials Science and Engineering, Warsaw University of Technology, Warsaw, Poland
Elzbieta Jezierska ; Faculty of Materials Science and Engineering, Warsaw University of Technology, Warsaw, Poland

Puni tekst: engleski, pdf (2 MB) str. 4-32 preuzimanja: 467* citiraj
APA 6th Edition
Kostecki, M. i Jezierska, E. (2014). Influence of Milling Media on Mechanically Exfoliated MoS2. Nanomaterials and Nanotechnology, 4 (Godište 2014), 4-32. https://doi.org/10.5772/59903
MLA 8th Edition
Kostecki, Marek i Elzbieta Jezierska. "Influence of Milling Media on Mechanically Exfoliated MoS2." Nanomaterials and Nanotechnology, vol. 4, br. Godište 2014, 2014, str. 4-32. https://doi.org/10.5772/59903. Citirano 27.01.2021.
Chicago 17th Edition
Kostecki, Marek i Elzbieta Jezierska. "Influence of Milling Media on Mechanically Exfoliated MoS2." Nanomaterials and Nanotechnology 4, br. Godište 2014 (2014): 4-32. https://doi.org/10.5772/59903
Harvard
Kostecki, M., i Jezierska, E. (2014). 'Influence of Milling Media on Mechanically Exfoliated MoS2', Nanomaterials and Nanotechnology, 4(Godište 2014), str. 4-32. https://doi.org/10.5772/59903
Vancouver
Kostecki M, Jezierska E. Influence of Milling Media on Mechanically Exfoliated MoS2. Nanomaterials and Nanotechnology [Internet]. 2014 [pristupljeno 27.01.2021.];4(Godište 2014):4-32. https://doi.org/10.5772/59903
IEEE
M. Kostecki i E. Jezierska, "Influence of Milling Media on Mechanically Exfoliated MoS2", Nanomaterials and Nanotechnology, vol.4, br. Godište 2014, str. 4-32, 2014. [Online]. https://doi.org/10.5772/59903

Sažetak
Wet ball milling was used to exfoliate MoS2. The aim of the study was to examine how the surface energy of all the individual materials affected the formation of the nanosheets. Two types of milling balls were selected: one made of steel and one made of Al2O3. The liquids used were water (H2O), isopropyl alcohol (C3H8O) and kerosene. The obtained nanosheets were identified and characterized using transmission/scanning electron microscopy and electron diffraction. Following sedimentation, scattered light intensity was measured. Our experiments showed that the material of the milling balls played a significant role in the experiment and had an influence on the number of the nanosheets obtained. Irrespective of the liquid employed, the number of nanosheets in the suspension obtained by milling with Al2O3 balls was greater by 100% than those obtained via milling with steel balls.

Ključne riječi
liquid exfoliation; ball milling; layered crystals; molybdenum disulphide; surface energy

Hrčak ID: 142644

URI
https://hrcak.srce.hr/142644

Posjeta: 627 *