hrcak mascot   Srce   HID

Izvorni znanstveni članak

Active flux tungsten inert gas welding of austenitic stainless steel AISI 304

D. Klobčar ; Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenia
Tušek ; Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenia
M. Bizjak ; Faculty of Natural Sciences, University of Ljubljana, Ljubljana, Slovenia
S. Simončič ; Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenia
V. Lešer ; Faculty of Health Sciences Novo mesto, Novo mesto, Slovenia

Puni tekst: engleski, pdf (358 KB) str. 617-620 preuzimanja: 824* citiraj
APA 6th Edition
Klobčar, D., Tušek, Bizjak, M., Simončič, S. i Lešer, V. (2016). Active flux tungsten inert gas welding of austenitic stainless steel AISI 304. Metalurgija, 55 (4), 617-620. Preuzeto s https://hrcak.srce.hr/157380
MLA 8th Edition
Klobčar, D., et al. "Active flux tungsten inert gas welding of austenitic stainless steel AISI 304." Metalurgija, vol. 55, br. 4, 2016, str. 617-620. https://hrcak.srce.hr/157380. Citirano 15.12.2019.
Chicago 17th Edition
Klobčar, D., Tušek, M. Bizjak, S. Simončič i V. Lešer. "Active flux tungsten inert gas welding of austenitic stainless steel AISI 304." Metalurgija 55, br. 4 (2016): 617-620. https://hrcak.srce.hr/157380
Harvard
Klobčar, D., et al. (2016). 'Active flux tungsten inert gas welding of austenitic stainless steel AISI 304', Metalurgija, 55(4), str. 617-620. Preuzeto s: https://hrcak.srce.hr/157380 (Datum pristupa: 15.12.2019.)
Vancouver
Klobčar D, Tušek, Bizjak M, Simončič S, Lešer V. Active flux tungsten inert gas welding of austenitic stainless steel AISI 304. Metalurgija [Internet]. 2016 [pristupljeno 15.12.2019.];55(4):617-620. Dostupno na: https://hrcak.srce.hr/157380
IEEE
D. Klobčar, Tušek, M. Bizjak, S. Simončič i V. Lešer, "Active flux tungsten inert gas welding of austenitic stainless steel AISI 304", Metalurgija, vol.55, br. 4, str. 617-620, 2016. [Online]. Dostupno na: https://hrcak.srce.hr/157380. [Citirano: 15.12.2019.]

Sažetak
The paper presents the effects of flux assisted tungsten inert gas (A-TIG) welding of 4 (10) mm thick austenitic stainless steel EN X5CrNi1810 (AISI 304) in the butt joint. The sample dimensions were 300 ´ 50 mm, and commercially available active flux QuickTIG was used for testing. In the planned study the influence of welding position and weld groove shape was analysed based on the penetration depth. A comparison of microstructure formation, grain size and ferrit number between TIG welding and A-TIG welding was done. The A-TIG welds were subjected to bending test. A comparative study of TIG and A-TIG welding shows that A-TIG welding increases the weld penetration depth.

Ključne riječi
A-TIG welding; austenitic stainless steel; QuickTIG active flux; microstructure; bending test

Hrčak ID: 157380

URI
https://hrcak.srce.hr/157380

Posjeta: 1.014 *