hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20171120121636

Machining of Spur Gears Using a Special Milling Cutter

Piotr Boral   ORCID icon orcid.org/0000-0002-4561-4124 ; Czestochowa Univertsity of Technology, Ul. Dąbrowskiego 69, 42-201 Częstochowa, Poland
Antun Stoić ; Mechanical Engineering Faculty, J. J. Strossmayer Univertsity of Osijek, Trg Ivane Brlić Mažuranić 2, HR-35000 Slavonski Brod, Croatia
Milan Kljajin   ORCID icon orcid.org/0000-0002-9291-4111 ; Mechanical Engineering Faculty, J. J. Strossmayer Univertsity of Osijek, Trg Ivane Brlić Mažuranić 2, HR-35000 Slavonski Brod, Croatia

Puni tekst: engleski, pdf (2 MB) str. 798-802 preuzimanja: 1.252* citiraj
APA 6th Edition
Boral, P., Stoić, A. i Kljajin, M. (2018). Machining of Spur Gears Using a Special Milling Cutter. Tehnički vjesnik, 25 (3), 798-802. https://doi.org/10.17559/TV-20171120121636
MLA 8th Edition
Boral, Piotr, et al. "Machining of Spur Gears Using a Special Milling Cutter." Tehnički vjesnik, vol. 25, br. 3, 2018, str. 798-802. https://doi.org/10.17559/TV-20171120121636. Citirano 21.11.2019.
Chicago 17th Edition
Boral, Piotr, Antun Stoić i Milan Kljajin. "Machining of Spur Gears Using a Special Milling Cutter." Tehnički vjesnik 25, br. 3 (2018): 798-802. https://doi.org/10.17559/TV-20171120121636
Harvard
Boral, P., Stoić, A., i Kljajin, M. (2018). 'Machining of Spur Gears Using a Special Milling Cutter', Tehnički vjesnik, 25(3), str. 798-802. https://doi.org/10.17559/TV-20171120121636
Vancouver
Boral P, Stoić A, Kljajin M. Machining of Spur Gears Using a Special Milling Cutter. Tehnički vjesnik [Internet]. 2018 [pristupljeno 21.11.2019.];25(3):798-802. https://doi.org/10.17559/TV-20171120121636
IEEE
P. Boral, A. Stoić i M. Kljajin, "Machining of Spur Gears Using a Special Milling Cutter", Tehnički vjesnik, vol.25, br. 3, str. 798-802, 2018. [Online]. https://doi.org/10.17559/TV-20171120121636

Sažetak
Spur gears have a wide application in the machine-building industry. Machining process primarily selected for these gears is hobbing method with modular hobs, or with Fellows cutters. Other methods which can be applied are profiling using the pull broaches, while the finishing can be done by gear shaving or grinding by the Maag, Niles or Reishauer methods. Moreover, in small (or unit) production, they may be formed using disc- or finger-type modular cutters. The article presents a method for cutting spur gears using a disc-type mill with a variable cutting plate profile. The influence of the number of blades of the presented milling cutter on the accuracy of the worked tooth profile was investigated.

Ključne riječi
disc-type milling cutter; gear machining; surface roughness

Hrčak ID: 202623

URI
https://hrcak.srce.hr/202623

Posjeta: 1.430 *