Izvorni znanstveni članak

https://doi.org/10.5552/drvind.2019.1842

Impact of Heat Treatment on the Quality of Tree-of-Heaven Wood

Ioannis Barboutis ; Aristotle University of Thessaloniki, Faculty of Forestry and Natural Environment, Department of Harvesting and Technology of Forest Products, Thessaloniki, Greece
Vasiliki Kamperidou orcid.org/0000-0003-3276-9394 ; Aristotle University of Thessaloniki, Faculty of Forestry and Natural Environment, Department of Harvesting and Technology of Forest Products, Thessaloniki, Greece

Sažetak

Ailanthus altissima (Miller) Swingle is a deciduous, fast-growing species that can tolerate extreme climatic conditions and is particularly invasive. In the framework of climate change, and the imperative need for carbon greenhouse gases sequestration, this species could acquire increasing importance through its utilization in the construction of wood based products and structures, due to its satisfying properties combined with its fast growth. This study determines for the first time the influence of thermal treatment, under different conditions (190 ºC, 210 ºC, 230 ºC for 2 hours), on some crucial physical, hygroscopic and mechanical properties of wood, in an attempt to improve its intense hygroscopic nature and not so desirable colour. Thermal treatment affected the dimensional stability and water absorbing capacity of wood in a positive way, decreasing EMC, swelling (tangential–radial) and adsorption percent, compared to untreated wood. The anisotropy of wood was decreased only to a small extent. The total surface colour differences (ΔΕ*), prior and after treatment, ranged between 0.48 and 54.57, and appeared to be well correlated with treatment temperature. Only the most intensive treatment influenced negatively the modulus of rupture and impact bending strength of wood, while the elasticity and compression strength of treated wood were proved to be similar to those of untreated wood. Tree-of-heaven could benefit from a mild or medium intensity heat treatment process, in order to be modified to an aesthetically pleasing wood with enhanced hygroscopic nature and properties, facilitating its use in cabinetry and in variable indoor and outdoor non-structural applications.

Ključne riječi

Ailanthus; colour; hygroscopic properties; mechanical strength; thermal treatment

Hrčak ID:

229811

URI

https://hrcak.srce.hr/229811

Datum izdavanja:

13.12.2019.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.222 *