hrcak mascot   Srce   HID

Stručni rad
https://doi.org/10.17559/TV-20190422154410

Application of CAD/CAE/CAM Systems in Permanent-Mold Casting Improvement

Nedeljko Dučić*   ORCID icon orcid.org/0000-0003-3336-8867 ; University of Kragujevac, Faculty of Technical Sciences Čačak, Sv. Save 65m 32000, Čačak, Serbia
Aleksandar Jovičić   ORCID icon orcid.org/0000-0002-3254-581X ; University of Kragujevac, Faculty of Technical Sciences Čačak, Sv. Save 65m 32000, Čačak, Serbia
Radomir Radiša ; Lola institute Ltd, Kneza Viseslava 70a, 11000, Belgrade, Serbia
Srećko Manasijević ; Lola institute Ltd, Kneza Viseslava 70a, 11000, Belgrade, Serbia
Radomir Slavković ; University of Kragujevac, Faculty of Technical Sciences Čačak, Sv. Save 65m 32000, Čačak, Serbia
Dragan Radović ; University "Union-Nikola Tesla", Faculty of engineering management, Bulevar vojvode Mišića 43, 11000, Belgrade, Serbia

Puni tekst: engleski, pdf (1 MB) str. 2077-2082 preuzimanja: 46* citiraj
APA 6th Edition
Dučić*, N., Jovičić, A., Radiša, R., Manasijević, S., Slavković, R. i Radović, D. (2020). Application of CAD/CAE/CAM Systems in Permanent-Mold Casting Improvement. Tehnički vjesnik, 27 (6), 2077-2082. https://doi.org/10.17559/TV-20190422154410
MLA 8th Edition
Dučić*, Nedeljko, et al. "Application of CAD/CAE/CAM Systems in Permanent-Mold Casting Improvement." Tehnički vjesnik, vol. 27, br. 6, 2020, str. 2077-2082. https://doi.org/10.17559/TV-20190422154410. Citirano 18.01.2021.
Chicago 17th Edition
Dučić*, Nedeljko, Aleksandar Jovičić, Radomir Radiša, Srećko Manasijević, Radomir Slavković i Dragan Radović. "Application of CAD/CAE/CAM Systems in Permanent-Mold Casting Improvement." Tehnički vjesnik 27, br. 6 (2020): 2077-2082. https://doi.org/10.17559/TV-20190422154410
Harvard
Dučić*, N., et al. (2020). 'Application of CAD/CAE/CAM Systems in Permanent-Mold Casting Improvement', Tehnički vjesnik, 27(6), str. 2077-2082. https://doi.org/10.17559/TV-20190422154410
Vancouver
Dučić* N, Jovičić A, Radiša R, Manasijević S, Slavković R, Radović D. Application of CAD/CAE/CAM Systems in Permanent-Mold Casting Improvement. Tehnički vjesnik [Internet]. 2020 [pristupljeno 18.01.2021.];27(6):2077-2082. https://doi.org/10.17559/TV-20190422154410
IEEE
N. Dučić*, A. Jovičić, R. Radiša, S. Manasijević, R. Slavković i D. Radović, "Application of CAD/CAE/CAM Systems in Permanent-Mold Casting Improvement", Tehnički vjesnik, vol.27, br. 6, str. 2077-2082, 2020. [Online]. https://doi.org/10.17559/TV-20190422154410

Sažetak
This paper presents the application of CAD/CAE/CAM systems at the improvement of the manufacturing the flotation balls for grinding ore. Flotation balls need to satisfy the appropriate requirements in terms of dimensional, chemical, mechanical and physical properties. These properties are directly related to technology of ball manufacturing, in this case - permanent-mold casting technology. Software tolls from the group of CAD/CAE/CAM systems were used for designing the casting parts, casting and feeding systems, mold and simulation of permanent-mold casting process. Based on results of casting process simulation the casting process in real industrial conditions was realized. After the casting process, testing of casting parts has been performed. The testing gave satisfactory results, so the presented methodology, based on CAD/CAE/CAM systems, is acceptable for manufacturing program in foundry.

Ključne riječi
casting; design; flotation balls; simulation

Hrčak ID: 248261

URI
https://hrcak.srce.hr/248261

Posjeta: 84 *