hrcak mascot   Srce   HID

Original scientific paper

Algorithm for Deriving Optimal Frame Size in Passive RFID UHF Class1-Gen2 Standard Using Combinatorial Model Boundaries

Petar Šolić ; Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, University of Split, Split, Croatia
Joško Radić ; Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, University of Split, Split, Croatia
Nikola Rožić   ORCID icon orcid.org/0000-0002-5445-8805 ; Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, University of Split, Split, Croatia

Fulltext: croatian, pdf (1 MB) pages 255-263 downloads: 739* cite
APA 6th Edition
Šolić, P., Radić, J. & Rožić, N. (2010). Algoritam za definiranje optimalne duljine okvira u pasivnoj UHF Class1-GEN2 tehnologiji korištenjem ograničenja iz kombinatornog modela. Automatika, 51 (3), 255-263. Retrieved from https://hrcak.srce.hr/61548
MLA 8th Edition
Šolić, Petar, et al. "Algoritam za definiranje optimalne duljine okvira u pasivnoj UHF Class1-GEN2 tehnologiji korištenjem ograničenja iz kombinatornog modela." Automatika, vol. 51, no. 3, 2010, pp. 255-263. https://hrcak.srce.hr/61548. Accessed 16 Jul. 2019.
Chicago 17th Edition
Šolić, Petar, Joško Radić and Nikola Rožić. "Algoritam za definiranje optimalne duljine okvira u pasivnoj UHF Class1-GEN2 tehnologiji korištenjem ograničenja iz kombinatornog modela." Automatika 51, no. 3 (2010): 255-263. https://hrcak.srce.hr/61548
Harvard
Šolić, P., Radić, J., and Rožić, N. (2010). 'Algoritam za definiranje optimalne duljine okvira u pasivnoj UHF Class1-GEN2 tehnologiji korištenjem ograničenja iz kombinatornog modela', Automatika, 51(3), pp. 255-263. Available at: https://hrcak.srce.hr/61548 (Accessed 16 July 2019)
Vancouver
Šolić P, Radić J, Rožić N. Algoritam za definiranje optimalne duljine okvira u pasivnoj UHF Class1-GEN2 tehnologiji korištenjem ograničenja iz kombinatornog modela. Automatika [Internet]. 2010 [cited 2019 July 16];51(3):255-263. Available from: https://hrcak.srce.hr/61548
IEEE
P. Šolić, J. Radić and N. Rožić, "Algoritam za definiranje optimalne duljine okvira u pasivnoj UHF Class1-GEN2 tehnologiji korištenjem ograničenja iz kombinatornog modela", Automatika, vol.51, no. 3, pp. 255-263, 2010. [Online]. Available: https://hrcak.srce.hr/61548. [Accessed: 16 July 2019]

Abstracts
MAC level efficiency constraints of the RFID Reader-Tag communication require proper frame size selection in order to achieve maximum throughput. To set optimal frame size, one needs to estimate the number of tags. Deriving optimal frame size results in reducing time for identification of large RFID tag populations, and thus increases throughput of RFID system. In accordance with the standard Dynamic Framed Slotted ALOHA (DFSA) protocol, we propose model for frame size adaptation using number of collisions (C) and successful slots (S) within the frame length L. We found
that expected number of tags N, linearly depends on S in the frame of length L, for fixed C. Proposed model for estimation of the number of tags can be described with 4 characteristic points, which can be calculated from proposed combinatorial model. Algorithm implementation in the first step estimates number of tags, and then in
the second step, using the estimates, set the optimal frame size.
In order to compare proposed system performance with the other approaches, we use standard measures, System Efficiency and Collision Ratio. Simulation results show that our method provide better performance than the Qselection algorithm, specified within the UHF-Class1-Gen2 standard.

Keywords
Dynamic framed slotted ALOHA; Transmission control strategy; Q-selection algorithm; RFID identification; Tags estimation method (TEM)

Hrčak ID: 61548

URI
https://hrcak.srce.hr/61548

[croatian]

Visits: 1.157 *