Izvorni znanstveni članak

Parametric study of friction stir spot welding of aluminium alloy 5754

D. Klobčar ; Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
J. Tušek ; Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
A. Skumavc ; Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
A. Smolej ; Faculty of Natural Sciences, University of Ljubljana, Ljubljana, Slovenia

Sažetak

The paper presents a parametric analysis of friction stir spot welding (FSSW) of aluminium alloy 5754 in a lap joint. Experimental plan was done according to the response surface methodology (RSM), where tool rotation speed varied between 988 and 3511 rpm, plunge rate between 24,4 and 150 mm/min and dwell time between 1 and 3,5s. The plunge depth was held constant at 0,4 mm. The welds were tensile-shear tested and the microstructure was analysed. Mathematical models describing the relationship between welding parameters and spot strength, axial force and rotational moment were developed and the optimal FSSW parameters were found.

Ključne riječi

friction stir spot welding; EN-AW 5754; force measurement; dynamometer; tensile test

Hrčak ID:

104365

URI

https://hrcak.srce.hr/104365

Datum izdavanja:

1.1.2014.

Posjeta: 2.164 *