Izvorni znanstveni članak
https://doi.org/10.15255/CABEQ.2014.2120
Use of the Steam as Gasifying Agent in Fluidized Bed Gasifier
N. Salami
; Brno University of Technology, Faculty of Mechanical Engineering, Energy Institute, Technická 2896/2, Brno
Z. Skála
; Brno University of Technology, Faculty of Mechanical Engineering, Energy Institute, Technická 2896/2, Brno
Sažetak
This work has studied the impact of gasification mediums (air and steam air mixture) on syngas components (H2, CO) and low heating value LHV. This study has been based on previous research and experimental studies conducted in fluidized bed by using air-steam as gasification agent and pine wood chips as feedstock. According to the results of the experiments and discussion, it has been found, that
the gas quality is improved with the use of the steam and air mixture. The parameters, with which to achieve the best quality of the produced gas at experimental conditions (ER = 29, Tf1 = 261 °C) are as follows: T101 = 829 °C, 0.67 S/B = 0.67, where hydrogen is
increased from 10.48 to 19.68 % and low heating value from 3.99 to 5.53 MJ m–3 and tar is decreased from 1964 to 1046 mg m–3 by increasing S/B from 0 to 0.67 at T101 = 829 °C.
Ključne riječi
gasification; gasifying agent; air; , steam
Hrčak ID:
137550
URI
Datum izdavanja:
6.4.2015.
Posjeta: 4.608 *