Građevinar, Vol. 68 No. 09., 2016.
Prethodno priopćenje
https://doi.org/10.14256/JCE.1335.2015
Strength properties of coated E-glass fibres in concrete
Sabapathy Yogeeswaran Kanag
Yeshwant Kumar Anandan
Prathulya Vaidyanath
Prashaanth Baskar
Sažetak
Test results obtained by studying the influence of epoxy coated E-glass fibre composites on the compressive and splitting tensile strengths of concrete are reported in the paper. Three grades of concrete and varying fibre volume fractions (0.5 %, 1 %, 1.5 % and 2 %) were used as test variables. It was observed that the maximum compressive strength was attained for the fibre volume fraction of 1.5%, whereas the splitting tensile strength was found to increase with an increase in the fibre volume fraction. Based on the test results, a mathematical model was developed using regression analysis.
Ključne riječi
coated glass fibres; fibre reinforced concrete; fibre volume fraction; compressive strength; splitting tensile strength
Hrčak ID:
168014
URI
Datum izdavanja:
26.10.2016.
Posjeta: 2.745 *