Izvorni znanstveni članak

https://doi.org/10.17559/TV-20180227172122

The Influence of Vacuum Level on the Friction Force Acting on the Pneumatic Cylinder Sealing Ring

Branko Tadic ; University of Kragujevac, Faculty of Engineering Sestre Janjic 6, Kragujevac, Serbia
Milutin Zivkovic ; Higher Technical School of Mechanical Engineering, Radoja Krstica 19, Trstenik, Serbia
Goran Simunovic ; Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Trg Ivane Brlic Mazuranic 2, 35000 Slavonski Brod, Croatia
Vladimir Kocovic ; University of Kragujevac, Faculty of Engineering Sestre Janjic 6, Kragujevac, Serbia
Tomislav Saric ; Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Trg Ivane Brlic Mazuranic 2, 35000 Slavonski Brod, Croatia
Djordje Vukelic orcid.org/0000-0003-2420-6778 ; University of Novi Sad, Faculty of Technical Sciences Trg Dositeja Obradovica 6, Novi Sad, Serbia

Sažetak

Presented in this paper are the results of measurement of friction force acting on the pneumatic cylinder sealing rings under high vacuum atmosphere. The investigations were conducted at relatively low levels of sliding speed of the sealing ring. Special device was constructed and implemented to facilitate this experiment. The results indicate the importance of the vacuum level on the friction force magnitude. Higher vacuum levels influence significant increase of friction force. Special phenomenon is the decreasing of friction force at higher sliding speeds of the sealing ring along the cylinder, under the constant vacuum level. Therefore, detailed examination of this phenomenon in the domain of high sliding speeds could yield interesting results.

Ključne riječi

cylinder; sealing ring; sliding friction; vacuum

Hrčak ID:

223286

URI

https://hrcak.srce.hr/223286

Datum izdavanja:

25.7.2019.

Posjeta: 2.266 *