Izvorni znanstveni članak
https://doi.org/10.30765/er.1467
Design and fabrication of a compact microstrip triplexer for wimax and wireless applications
Abbas Rezaei
; Department of Electrical Engineering, Kermanshah University of Technology, Kermanshah, Iran
Salah I. Yahya
; Department of Communication and Computer Engineering, Cihan University-Erbil, Erbil, Kurdistan Region, Iraq, Department of Software Engineering, Faculty of Engineering, Koya University, Koya KOY45, Kurdistan Region, Iraq
Leila Noori
; Department of Electrical and Electronics Engineering, Shiraz University of Technology, Shiraz, Iran
Mohd Haizal Jamaluddin
; Wireless Communication Centre, School of Electrical Engineering, Universiti Teknologi Malaysia, Johor, Malaysia
Sažetak
A novel structure to design a microstrip triplexer for wireless and WiMAX applications is presented. To obtain a compact microstrip layout, step impedance resonators and coupled lines are used. The introduced triplexer has a size of 0.35λg×0.26λg, where λg is calculated at 2.3 GHz. Also, the obtained insertion losses are 0.78 dB, 1.1 dB and 0.62 dB at 2.3 GHz, 3.2 GHz and 3.6 GHz, respectively. The LC model of the presented resonator is investigated to tune three resonance frequencies by calculating numerical values of inductors and capacitors. Finally, the designed triplexer is simulated and measured.
Ključne riječi
compact; microstrip; resonator; triplexer; WiMAX; Wireless
Hrčak ID:
247198
URI
Datum izdavanja:
27.9.2021.
Posjeta: 1.524 *