Izvorni znanstveni članak

https://doi.org/10.17559/TV-20190316041813

Research on Parametric Model for Surface Processing Prediction of Aero-Engine Blades

Lei Qiu ; Ningbo University of Technology, Ningbo 305211, P. R. China, Zhejiang University of Technology, Hangzhou 310032, P. R. China
Shiming Ji* ; Zhejiang University of Technology, Hangzhou 310032, P. R. China. Key Laboratory of E&M, Ministry of Education & Zhejiang Province, Hangzhou 310032, P. R. China
Xi Zeng ; Zhejiang University of Technology, Hangzhou 310032, P. R. China, The State Key Lab of Fluid Power and Mechatronic Systems, Zhejiang university, Hangzhou 310058, P. R. China
Dapeng Tan ; Key Laboratory of E&M, Ministry of Education & Zhejiang Province, Hangzhou 310032, P. R. China
Man Ge ; Key Laboratory of E&M, Ministry of Education & Zhejiang Province, Hangzhou 310032, P. R. China

Sažetak

This paper presented a method for establishing a blade surface machining prediction model based on a parametric model. The abrasive grain state of the grinding tool was divided into initial wear stage, stable wear stage and sharp wear stage. Based on this, a parametric prediction model of engine blade surface material removal was established. In this paper, the simulation of blade surface machining was carried out. In this work, the blade was divided into several sections according to the direction from the blade root to the blade tip. A certain curve of the outer contour was fitted with a specific arc to reduce the calculation amount. Through a series of simulation calculations, the expressions of the above parametric prediction model were obtained, and several experiments were carried out to verify the feasibility of the prediction model, and the results were analyzed.

Ključne riječi

aero engine; blades; parametric model; surface processing prediction

Hrčak ID:

255830

URI

https://hrcak.srce.hr/255830

Datum izdavanja:

17.4.2021.

Posjeta: 1.286 *