Izvorni znanstveni članak
https://doi.org/10.17794/rgn.2022.1.6
LEACHING FOR IRON REMOVAL FROM LOW-GRADE BAUXITE ORE TO ACCESS REFRACTORY INSTRUCTION
Zahra Jalili
; Department of Mining Engineering, Faculty of Engineering, Urmia University-Iran
Ataallah Bahrami
orcid.org/0000-0001-6315-4486
; Department of Mining Engineering, Faculty of Engineering, Urmia University-Iran
Masoud Ghadri
; Ghezel Gheye Bauxite Mine engineer, West Azerbaijan province, Shahin-dezh city-Iran
Behzad Nemati Akhgar
; Department of Mining Engineering, Faculty of Engineering, Urmia University-Iran
Fatemeh Kazemi
; PhD student of mineral processing, Faculty of Engineering, University of Kashan-Iran
Sažetak
Iron-bearing minerals are the most important interfering compounds that are found with bauxite reserves. The element iron has adverse effects on bauxite applications, including the use of bauxite in refractory soils. The purpose of this research is to investigate the possibility of iron removal from low-grade bauxite ores to utilize them in refractory industries. For achieving this purpose, iron removal tests were performed on bauxite samples with an alumina to silica modulus of 0.73. After determining the appropriate iron removal method among the magnetic separation, calcination, and leaching (with H2SO4 and HCl) processes, optimal separation conditions were determined by tests that were designed using the Taguchi method. According to leaching results, using HCl for raw feed (un-calcined) provided the best result for iron removal. During this test, Fe2O3 grade decreased from 5.14% to 0.08%, and the alumina to silica modulus increased to 0.75. Calcination of the concentrate obtained from this test has led to favorable results in reducing the Fe2O3 grade (0.04%) and increasing the Al2O3 grade. Afterwards, in tests designed by the Taguchi method, the effect of parameters such as time, process temperature, HCl concentration, and feed grain size on iron removal from bauxite by HCl leaching processes are discussed. According to the results, the best efficiency of iron removal for a feed grain size of 250 µm is achieved in the following conditions: 30% HCl, process temperature of 25°C, and process time of 120 minutes. In this case, iron removal efficiency and Fe2O3 grade in process concentrate are 92.78% and 0.56%, respectively.
Ključne riječi
bauxite; iron removal; leaching; Taguchi; refractory
Hrčak ID:
271869
URI
Datum izdavanja:
2.2.2022.
Posjeta: 1.432 *