Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.15255/KUI.2023.007

From Macro to Micro Plastics; Influence of Photo-oxidative Degradation

Josipa Papac Zjačić ; Zavod za polimerno inženjerstvo i organsku kemijsku tehnologiju, Sveučilište u Zagrebi, Fakultet kemijskog inženjerstva i tehnologije, Trg Marka Marulića 19, 10 000 Zagreb
Magdalena Vujasinović ; Zavod za polimerno inženjerstvo i organsku kemijsku tehnologiju, Sveučilište u Zagrebi, Fakultet kemijskog inženjerstva i tehnologije, Trg Marka Marulića 19, 10 000 Zagreb
Marija Kovačić orcid id orcid.org/0009-0001-8448-8837 ; Zavod za polimerno inženjerstvo i organsku kemijsku tehnologiju, Sveučilište u Zagrebi, Fakultet kemijskog inženjerstva i tehnologije, Trg Marka Marulića 19, 10 000 Zagreb
Ana Lončarić Božić orcid id orcid.org/0000-0001-5853-5313 ; Zavod za polimerno inženjerstvo i organsku kemijsku tehnologiju, Sveučilište u Zagrebi, Fakultet kemijskog inženjerstva i tehnologije, Trg Marka Marulića 19, 10 000 Zagreb
Hrvoje Kušić ; Zavod za polimerno inženjerstvo i organsku kemijsku tehnologiju, Sveučilište u Zagrebi, Fakultet kemijskog inženjerstva i tehnologije, Trg Marka Marulića 19, 10 000 Zagreb
Zvonimir Katančić ; Zavod za polimerno inženjerstvo i organsku kemijsku tehnologiju, Sveučilište u Zagrebi, Fakultet kemijskog inženjerstva i tehnologije, Trg Marka Marulića 19, 10 000 Zagreb
Zlata Hrnjak Murgić orcid id orcid.org/0000-0003-4729-5603 ; Zavod za polimerno inženjerstvo i organsku kemijsku tehnologiju, Sveučilište u Zagrebi, Fakultet kemijskog inženjerstva i tehnologije, Trg Marka Marulića 19, 10 000 Zagreb


Puni tekst: engleski pdf 1.277 Kb

str. 463-471

preuzimanja: 97

citiraj


Sažetak

The impact of plastic waste on the environment, human health, and ecosystems is one of the most important issues today. Once released into the environment, plastic waste is exposed to various stress factors that can lead to a reduction in its structural integrity and consequently to its fragmentation into smaller pieces. In this work, the effects of simulated UV aging on the surface properties and fragmentation of high-density polyethylene (HDPE) films were studied. HDPE films were prepared from pristine polymer granules, and aged for 14, 28, and 42 days under artificial UV irradiation. The samples were characterised before and after each irradiation period to inspect structural and surface changes. FTIR spectra revealed the appearance of carbonyl (C=O) and carbon-oxygen (C−O, O−C=O, C−O−O−) groups due to photodegradation of HDPE. The change in surface polarity with UV irradiation time was determined by measuring the water contact angle, while the surface morphology was analysed using a SEM microscope. The results revealed a significant increase in carbonyl index, increased hydrophilicity, and increased brittleness resulting from a high degree of photodegradation after 28 and 42 days of UV irradiation. The different particle size distribution yielded upon grinding indicated that aged HDPE films are more prone to fragmentation into micro-sized particles.

Ključne riječi

plastic waste; HDPE films; photodegradation; hydrophilicity-hydrophobicity; fragmentation

Hrčak ID:

304924

URI

https://hrcak.srce.hr/304924

Datum izdavanja:

13.7.2023.

Podaci na drugim jezicima: hrvatski

Posjeta: 257 *