Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.5552/drvind.2025.0239

Improving Physical and Surface Characteristics of Oriental beech Using PEG-400, Vaseline, and Epoxy Coatings

Emir Özdemi̇r ; Muğla Sıtkı Koçma University, MUĞLA, Turkey
Mustafa Kucuktuvek ; İskenderun Technical University, Faculty of Architecture, Hatay, Turkey
Caglar Altay ; aydin adnan menderes university, Aydin, Turkey
Mehmet Acar ; mugla sitki kocman university, Muğla, Turkey
Hilmi Toker ; Muğla Sıtkı Koçman University, MUĞLA, Turkey
Ergun Baysal ; Mugla Sitki Kocman University, , Turkey


Puni tekst: engleski pdf 551 Kb

str. 255-262

preuzimanja: 155

citiraj


Sažetak

Wood is widely used in construction and furniture industries; however, its physical and surface properties are often affected by weathering. This study evaluates the physical and surface properties of Oriental beech wood treated with some chemicals and protective coatings to improve durability. Specimens were impregnated with a 3 % aqueous solution of polyethylene glycole-400 (PEG-400) and vaseline (V), followed by an epoxy resin (EPR) coating. Physical tests such as oven-dry density, air-dry density and water absorption tests were performed. Also, some surface tests such as color and adhesion strength tests were conducted after three months of natural weathering in Muğla, Turkey. Results demonstrated that the combination of vaseline treatment and epoxy resin coating yielded the highest color stability. Chemical impregnation before epoxy coating caused significant decrease in adhesion strength of wood before weathering. While weathering caused a general decline in adhesion strength, pre-impregnation with chemicals before epoxy coating significantly reduced this decrease. Furthermore, impregnated and coated specimens exhibited higher oven-dry and air-dry densities alongside reduced water absorption compared to untreated control group, highlighting the effectiveness of these treatments.

Ključne riječi

impregnation; coating; color; adhesion test; oven-dry and air-dry densities; weathering

Hrčak ID:

335537

URI

https://hrcak.srce.hr/335537

Datum izdavanja:

3.4.2026.

Posjeta: 392 *