Stručni rad

PRELIMINARY SELECTION OF BASIC PARAMETERS OF DIFFERENT TORSIONAL VIBRATION DAMPERS INTENDED FOR USE IN MEDIUM-SPEED DIESEL ENGINES

Ivan Filipović ; Mechanical Engineering Faculty, University of Sarajevo, Sarajevo, Bosnia and Herzegovina
Dževad Bibić orcid.org/0000-0003-3762-9243 ; Mechanical Engineering Faculty, University of Sarajevo, Sarajevo, Bosnia and Herzegovina
Aleksandar Milašinović ; Mechanical Engineering Faculty, Unversity of Banja Luka, Banja Luka, Bosnia and Herzegovina
Almir Blažević ; Mechanical Engineering Faculty, University of Sarajevo, Sarajevo, Bosnia and Herzegovina
Adnan Pecar ; Automotive Centre Sarajevo, Sarajevo, Bosnia and Herzegovina

Sažetak

In the development and application of highly dynamic mechanical systems, major problems can arise from usually unwanted accompanying processes, such as torsional vibrations. The internal combustion engine is a typical dynamic system with a high probability of fracture of a system part due to the effects of torsional vibrations. In engineering practice, the IC engine crankshaft fracture due to torsional vibrations is prevented by using additional devices that allow the transfer of critical vibration modes of the crankshaft out of the IC engine operating range, or devices damping the resulting twist angle amplitudes.
This paper presents a possible approach to defining parameters of torsional oscillatory systems of IC engines needed for a preliminary selection of basic parameters of various types of torsional vibration dampers, such as the elastic damper, the balance weight damper and the dual mass flywheel. The proposed physical and mathematical models and methods of defining the input parameters were compared with experimental results.

Ključne riječi

torsional vibration damper; IC engine; balance weight damper; dual mass flywheel

Hrčak ID:

89243

URI

https://hrcak.srce.hr/89243

Datum izdavanja:

30.10.2012.

Posjeta: 4.831 *