Skoči na glavni sadržaj

Izvorni znanstveni članak

Cost- tolerance prediction models for electrochemical machining of metal matrix composites

Solaiyappan Ayyappan ; Assistant Professor,Department of Mechanical Engineering, Govt. College of Engineering, Salem-636011, Tamilnadu, India.
Mani Kalaimathi ; School of Mechanical and Building Sciences, VIT University, Vellore-632014, Tamilnadu, India.
Gopalan Venkatachalam ; School of Mechanical and Building Sciences, VIT University, Vellore-632014, Tamilnadu, India.


Puni tekst: engleski PDF 674 Kb

str. 299-307

preuzimanja: 539

citiraj


Sažetak

Electrochemical machining (ECM), is an advanced manufacturing technique capable of machining hard composite materials with good tolerance. However, the huge investment and operating costs make the ECM process uneconomical. This work is hence intended to develop cost-tolerance relationship for ECM process for 6061Al/10%wt Al2O3/5%wt SiC composites. The coefficient of determination (R2 ) values justifies the adequacy of developed cost and tolerance models. Analysis of variance (ANOVA) test is performed to understand the effect of ECM process parameters on cost and tolerance. The process parameters such as current, voltage and feed rate significantly affect the operating costs while the tolerance is affected by all the parameters.

Ključne riječi

electrochemical machining, cost-tolerance models, ANOVA

Hrčak ID:

146986

URI

https://hrcak.srce.hr/146986

Posjeta: 746 *