Skoči na glavni sadržaj

Stručni rad

https://doi.org/10.31895/hcptbn.13.3-4.10

Agglomeration process in the fluidized bed, the effecting parameters and some applications

Hira Yuksel orcid id orcid.org/0000-0001-7110-4200 ; Department of Food Engineering, Ege University, Izmir, Turkey
Nur Dirim ; Department of Food Engineering, Ege University, Izmir, Turkey


Puni tekst: engleski pdf 374 Kb

str. 159-163

preuzimanja: 1.790

citiraj


Sažetak

The agglomeration process has been commonly used to improve the functional properties of powder products to form larger agglomerates.
Agglomeration provides a granular structure to powders, reduce the dusting and improving their characteristics, such as storage stability,
wettability, dispersibility, and solubility. This process can be performed by different methods, one of which is fluidized bed agglomeration widely
used in food processing since the agglomerates produced by this technique have high porosity, low density, and good mechanical resistance. At the same time, this process is influenced by many factors; e.g., inlet air temperature, air velocity, mixing rate, and properties of the binder agents. Inlet air temperature affects the mass and heat transfer; air velocity prevents caking and accelerates mass and heat transfer; mixing rate allows mixing the binder agent uniformly over the particles; and the properties of the binder agent, such as concentration and viscosity have an impact on the properties of the final product. These four factors should be well known and controlled so that the agglomerates produced have the desired properties. Furthermore, the use of fluidized bed agglomeration results in products that can be used in widespread areas and in high quantities, and this method also creates the opportunity to utilize excess foods not consumed.

Ključne riječi

powders; agglomeration process; fluidized bed agglomeration; particle size; powder properties

Hrčak ID:

217750

URI

https://hrcak.srce.hr/217750

Datum izdavanja:

19.12.2018.

Posjeta: 2.357 *