Preliminary communication

https://doi.org/10.17818/NM/2020/1.3

Digital Signal Processing for Hydroacoustic System in Biomimetic Underwater Vehicle

Pawel Piskur orcid.org/0000-0002-8823-4316 ; Institute of Electrical Engineering and Automatics Polish Naval Academy Gdynia, Poland
Marek Gasiorowski ; Institute of Electrical Engineering and Automatics Polish Naval Academy Gdynia, Poland

Abstract

Signal processing in hydroacoustic system will be presented in this paper. The research results, depicted in this article, were achieved during realization one of the stages of the project for the development of an biomimetic underwater vehicle (BUV). The hydroacoustic system is installed inside Biomimetic Underwater Vehicle no. 2 (BUV2) and is designed for passive obstacle detection system. The passive measurement system was based on two hydrophones mounted on the upper part of the BUV2. The results of the hydroacoustic module testing were made in a real environment. The signals from the hydrophones were converted from analog to digital form and then filtered and analyzed by using algorithms implemented in the Texas Instruments C2000 series microcontroller.

Keywords

digital signal processing; hydrophone; passive detection of obstacles; Biomimetic Underwater Vehicle

Hrčak ID:

232519

URI

https://hrcak.srce.hr/232519

Publication date:

11.3.2020.

Visits: 1.590 *