Prethodno priopćenje
https://doi.org/10.17818/NM/2020/1.3
Digital Signal Processing for Hydroacoustic System in Biomimetic Underwater Vehicle
Pawel Piskur
orcid.org/0000-0002-8823-4316
; Institute of Electrical Engineering and Automatics Polish Naval Academy Gdynia, Poland
Marek Gasiorowski
; Institute of Electrical Engineering and Automatics Polish Naval Academy Gdynia, Poland
Sažetak
Signal processing in hydroacoustic system will be presented in this paper. The research results, depicted in this article, were achieved during realization one of the stages of the project for the development of an biomimetic underwater vehicle (BUV). The hydroacoustic system is installed inside Biomimetic Underwater Vehicle no. 2 (BUV2) and is designed for passive obstacle detection system. The passive measurement system was based on two hydrophones mounted on the upper part of the BUV2. The results of the hydroacoustic module testing were made in a real environment. The signals from the hydrophones were converted from analog to digital form and then filtered and analyzed by using algorithms implemented in the Texas Instruments C2000 series microcontroller.
Ključne riječi
digital signal processing; hydrophone; passive detection of obstacles; Biomimetic Underwater Vehicle
Hrčak ID:
232519
URI
Datum izdavanja:
11.3.2020.
Posjeta: 1.558 *