Metallurgy, Vol. 62 No. 3-4, 2023.
Original scientific paper
Study on cold spinning deformation behavior and load mechanism of conical thin-walled aluminum alloy parts
L. B. Li
; Healthy & Intelligent Kitchen Engineering Research Center of Zhejiang Province, China
J. B. Zheng
X. D. Shu
; Healthy & Intelligent Kitchen Engineering Research Center of Zhejiang Province, China
J. Zhang
W. W. Shen
Abstract
Aiming at the problem that the wall thickness uniformity of conical thin-walled aluminum alloy parts formed by single-pass spinning is difficult to control, this paper systematically studies the influence of different spinning parameters on the material evolution law and load mechanism during the forming process of 1070 thin-walled aluminum alloy. The effects of slab thickness, roller gap and feed ratio on the macroscopic forming quality and mechanical load of 1070 thin-walled aluminum alloy conical parts were simulated by Simufact.forming software. Finally, the optimal spinning parameters of 1070 thin-walled aluminum alloy conical parts were obtained. The final results show that increasing the diameter-thickness ratio of the blank can prevent wrinkling, and reasonable spinning parameters can improve the uniformity of the wall thickness of the product.
Keywords
aluminum alloy; thin-walled; spinning forming; forming quality
Hrčak ID:
300997
URI
Publication date:
3.7.2023.
Visits: 717 *