Skip to the main content

Original scientific paper

https://doi.org/10.15255/KUI.2026.029

Additive Manufacturing and Mechanical Characterisation of COC/TiO₂/CNT Composite Filaments for 3D-Printed Static Mixers

Marijan-Pere Marković ; University of Zagreb Faculty of Chemical Engineering and Technology, Trg Marka Marulića 19, 10 000 Zagreb, Croatia *
Elizabeta Forjan ; University of Zagreb Faculty of Chemical Engineering and Technology, Trg Marka Marulića 19, 10 000 Zagreb, Croatia
Domagoj Vrsaljko ; University of Zagreb Faculty of Chemical Engineering and Technology, Trg Marka Marulića 19, 10 000 Zagreb, Croatia

* Corresponding author.


Full text: english pdf 1.237 Kb

page 635-643

downloads: 0

cite


Abstract

Cyclic olefin copolymer (COC)-based composite filaments containing TiO₂ and carbon nanotubes (CNTs) were developed for fused filament fabrication (FFF) of functional static mixer structures. The influence of filler composition (1.5–3 wt% TiO₂ and 0–0.5 wt% CNTs) on filament processability, mechanical performance, and printability was systematically evaluated. Composite filaments were produced via twin-screw melt compounding and extruded to a diameter of 1.75 mm, followed by FFF of tensile specimens and static mixers. Mechanical properties of the printed specimens were determined according to ISO 527-2:2025. Additionally, tensile work to fracture was obtained from the tensile testing software as a supplementary metric representing the mechanical work recorded up to specimen fracture. TiO₂ addition had minimal impact on tensile strength and printability, whereas CNT incorporation progressively reduced tensile strength (by up to 68 % relative to the corresponding TiO₂-only formulation), elongation, and tensile work to fracture. All formulations exhibited stable extrusion, uniform filament formation, and defect-free printing without warping or clogging. Young’s modulus ranged from 450 to 870 MPa. The study demonstrates that COC/TiO₂/CNT hybrid systems can be successfully processed under the selected conditions for the FFF fabrication of geometrically complex flow components, enabling direct fabrication of static mixers for process intensification applications.

Keywords

additive manufacturing; composite filaments; static mixers; titanium dioxide; cyclic olefin copolymer; carbon nanotubes

Hrčak ID:

353568

URI

https://hrcak.srce.hr/353568

Publication date:

21.11.2026.

Article data in other languages: croatian

Visits: 0 *