Skip to the main content

Original scientific paper

https://doi.org/10.15255/KUI.2026.031

Thermal, Mechanical, and Biodegradation Properties of Polylactide/Hemp Fibre Composites

Martina Kujavić ; University of Zagreb Faculty of Chemical Engineering and Technology, Trg Marka Marulića 19, 10 000 Zagreb, Croatia
Martina Krajpl ; University of Zagreb Faculty of Chemical Engineering and Technology, Trg Marka Marulića 19, 10 000 Zagreb, Croatia
Zvonimir Katančić ; University of Zagreb Faculty of Chemical Engineering and Technology, Trg Marka Marulića 19, 10 000 Zagreb, Croatia *

* Corresponding author.


Full text: english pdf 2.380 Kb

page 645-655

downloads: 0

cite


Abstract

Biodegradable composites based on polylactide (PLA) and industrial hemp fibres were prepared by melt processing in a co-rotating twin-screw extruder and characterised in terms of their thermomechanical and biodegradation behaviour. Composites containing 5, 10, 20, and 30 wt.% hemp were produced and investigated using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), tensile testing, melt flow rate (MFR) determination, and soil burial biodegradation tests conducted over 60 days.
TGA results showed that the addition of hemp decreased the thermal stability of the composites, shifting the onset of degradation to lower temperatures. DSC analysis revealed that hemp fibres acted as nucleating agents, promoting heterogeneous nucleation and inducing melting–recrystallisation phenomena, resulting in the appearance of a double melting peak. SEM micrographs indicated good dispersion and acceptable interfacial adhesion at lower hemp loadings (≤ 10 wt.%), while higher loadings led to agglomeration, void formation, and phase separation. Tensile strength and elongation at break decreased progressively with increasing hemp content, while the tensile modulus showed a modest improvement up to 10 wt.% hemp. Notably, the melt flow rate increased significantly with hemp loading. This unusually high increase in melt flow rate at elevated hemp contents may suggest partial degradation of the PLA matrix during processing. Biodegradation tests demonstrated that higher hemp content accelerated mass loss in soil.
The results indicate that PLA/hemp biodegradable composites with a favourable balance of thermal, mechanical, and processing properties can be obtained at hemp loadings of up to 10 wt.%, making them promising sustainable materials.

Keywords

polylactide; PLA; industrial hemp; biodegradable composites; thermomechanical properties; biodegradation

Hrčak ID:

353572

URI

https://hrcak.srce.hr/353572

Publication date:

21.11.2026.

Article data in other languages: croatian

Visits: 0 *